Discussion about the Korg PolySix synthesizer

Nothing like a good project, eh?!

Here are the gory details for future posterity...

1. The four top panel outer screws: M3x14 black, pan cross head machine
screw with nylon washer.
2. The top panel 'inner' screws that fasten the PCBs: M2x5 black, pan cross
head machine screw with nylon washer
3. The underside top panel screws that fasten those same PCBs to the
brackets: M2x5 zinc cross head machine screw
4. The bottom screws for the keyboard assembly: M5x20 black, flanged pan
cross head machine screw
5. The two screws underneath for the bend wheels: M3x50 black, pan cross
head machine screw with nylon washer

OE&E. All measurements courtesy of my wonky steel rule. UOM metric because I
am a European sort of guy...

Cheers,
Andy


On 03/09/2010 23:24, "ML" <f115@rocketmail.com> wrote:

> 
> That would be amazing. I'd greatly appreciate it. It's a pile of them!
> 
> - The four top panel outer screws
> - The top panel 'inner' screws that fasten the PCBs
> - The underside top panel screws that fasten those same PCBs to the brackets
> - The bottom screws for the keyboard assembly
> - The two screws underneath for the bend wheels
> 
> Heh - this poly is just a pile right now. Not quite in a bag but close :) The
> lower assembly PCBs are all in place though so at least those wood screws
> appear to all be there.



[Non-text portions of this message have been removed]