Sequential circuits samplers

Thanks.  I could swear I set it to mode 3A but it wasn't working 
properly.  Oddly, too, although I had the switch in back set to THRU, 
it was still sending note and controller messages to the next synth 
down the line.  I guess I'll have to play with it more, but the more 
I work with my P2K the more I suspect it has an issue related to the 
Op ROM.


--- In prophet2000@yahoogroups.com, ferrograph@a... wrote:
> <<My main interest is to set up my Prophet to respond a certain 
MIDI 
> channel.>>
> 
> mode 3A, they call it in the book, though it's the most widely used 
midi mode 
> now. then select the channel. in mode 3B, the machine can be bi-
timbral and 
> you need to press "execute" to see the other channel setting. be 
aware, though, 
> that the dynamic allocation should be on and a mono connection made 
to the 
> machine for anything like "normal" behaviour in 3A; if it's off, or 
if you use 
> left + right outputs, you'll either only be 4-voice polyphonic or 
have the 
> sounds bouncing around the stereo image. 
> 
> duncan.