Sequential circuits samplers

Hello

Does anyone know how to set up the individual outputs of the P2002+?

I have just a manual of the the P2000 and do not know how to set up the 8 individual output so that each sample is routed to each individual output.

Thanks and regards

I think the forced allocation mode does this. Fo under dynamic allocation. 



------------------------------

On Tue, Oct 2, 2012 8:42 AM EDT marco.benatti wrote:

>Hello
>
>Does anyone know how to set up the individual outputs of the P2002+?
>
>I have just a manual of the the P2000 and do not know how to set up the 8 individual output so that each sample is routed to each individual output.
>
>Thanks and regards
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>

If i remember correctly there is no set up. Samples get allocated to outputs: 1/9, 2/10, 3/11, etc. Only setup would be 8 patchcords plugged into your mixer...

Marco, 
you may want to look at using Midi Mode 4, which assigns every sample
to a specific MIDI channel.
The voice allocation is fixed: Voice 1/9 to output one and so on...

Best regards
Burt

--- In prophet2000@yahoogroups.com, "marco.benatti" <marco.benatti@...> wrote:

>
> Hello
> 
> Does anyone know how to set up the individual outputs of the P2002+?
> 
> I have just a manual of the the P2000 and do not know how to set up the 8 individual output so that each sample is routed to each individual output.
> 
> Thanks and regards
>

Thanks for the answer I ll try it out!
 


________________________________
From: burtland12 <burt@...>
To: prophet2000@yahoogroups.com 
Sent: Tuesday, October 2, 2012 4:10 PM
Subject: [prophet2000] Re: Individual Output of the P2002+


  

Marco, 
you may want to look at using Midi Mode 4, which assigns every sample
to a specific MIDI channel.
The voice allocation is fixed: Voice 1/9 to output one and so on...

Best regards
Burt

--- In mailto:prophet2000%40yahoogroups.com, "marco.benatti" <marco.benatti@...> wrote:

>
> Hello
> 
> Does anyone know how to set up the individual outputs of the P2002+?
> 
> I have just a manual of the the P2000 and do not know how to set up the 8 individual output so that each sample is routed to each individual output.
> 
> Thanks and regards
>

voice allocation > "Fo", forced output. there is no need to use midi mode 4 to make this work. you can leave the midi mode on 3 & (for example) play a set of drum samples on channel 10 with each pair of sounds (1/9, 2/10 etcetera) coming from its own hardware output.

duncan.

--- In prophet2000@yahoogroups.com, "marco.benatti" <marco.benatti@...> wrote:

>
> Hello
> 
> Does anyone know how to set up the individual outputs of the P2002+?
> 
> I have just a manual of the the P2000 and do not know how to set up the 8 individual output so that each sample is routed to each individual output.
> 
> Thanks and regards
>