Vintage Synth Repair

Hi Robert,

 

The Omni supply produces 2 voltages, +15V and -15V with a common ground
connection. The other connections on the power supply schematic are remote
sense lines. You can ignore these if you are going to replace the supply
with a new one. 

 

A +15/-15V linear supply at 1A current would be fine. However I don't know
the actual current requirements for the Omni so you may be able to use a
supply with lower current (someone please comment here if you know the
correct value).

 

Your PC supply won't do the job. Most switched supplies around have
inadequate current rating and require a minimum load on the +5V rail to
work.

 

I took a look at the schematic earlier and I think that all of the parts for
the original design can still be found here in the US. 

 

mw

-----Original Message-----
From: Roberto Garcia [mailto:flyingwallenda_roberto@...] 
Sent: Tuesday, September 16, 2003 2:22 PM
To: vintagesynthrepair@yahoogroups.com
Subject: [vintagesynthrepair] THE POWER SUPPLY IS MISSING IN MY OMNI

 

hi all, i`m new here, and excuse me if you don`t understand my 
english, in my country people speak spanish.

I have an Arp Omni, somebody gave me it as a gift, i was trying to 
make it produce a sound, so i have opened it, and the power supply 
is missing. I have wroted to Peter Brown, and he told me that 
somebody here got the same problem, so i have a few questions for 
that person(s):

-As you know, from the power supply come out 6 voltages (i`m taking 
the reference of the schematics at the page of peter brown), do you 
think that if i produce that voltages with another power supply it 
will work normally???

-What amperage produces the power supply??

-I have a power supply of a PC, but can only produce until 12V, can 
i use it or is not enough voltage?

-The parts on the Power Supply board are still in production??








Yahoo! Groups Sponsor



ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=17050321
44:HM/A=1754016/R=0/SIG=11pv1u2ju/*http:/www.ediets.com/start.cfm?code=30529
&media=atkins> click here


 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupmai
l/S=:HM/A=1754016/rand=212557988> 


To unsubscribe from this group, send an email to:
vintagesynthrepair-unsubscribe@egroups.com



Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/>  Terms of Service.