Vintage Synth Repair

Thanks Steve and Terje!

It was IC 401 and one failed FET... now it is alive and well again. Well, the S/H doesn´t sample or hold, but I can live with that :)

cheers,
Ami



--- In vintagesynthrepair@yahoogroups.com, Stephen Jones <thirteentech@...> wrote:
>
> Check that your current source (IC304) is OK by seeing if you are getting a CV out from the jack on the back of the synth. Check that R401 isn't open circuit. Otherwise check IC 401 and 402.
>