Vintage Synth Repair

Great. Thanks for the response. I've been reloading patches from my MAC classic and cleaning up both units and refurbing a couple easy CZ cartridges and my poor old CZ101 to do patch dumps. The CZ101 isn't doing well after all those D batteries inside exploded years ago. 
  Thanks


________________________________
 From: scituate_mass <sneakyflute@...m>
To: vintagesynthrepair@yahoogroups.com 
Sent: Sunday, June 9, 2013 5:21 AM
Subject: [vintagesynthrepair] Re: Casio CZ-1 Omron Relay Replacement
 


  
Hi,

Omron G5V-2-DC5 is a suitable replacement for the relay and matches the pin configuration perfectly. They have it at Mouser and Digikey. Mouser is cheaper.

best,

DT

--- In vintagesynthrepair@yahoogroups.com, Paul Krull <paul.krull@...> wrote:
>
> 
> 
>  Hi Folks:
>  I just got a Casio CZ-1 and it seems to need the relay replaced as the out put is pretty quiet and there's a big hissy noise floor. The original was an Omron G2VN237PL5VDC which I guess is not available. Digikey sells this:
>  
> http://www.digikey.com/scripts/DkSearch/dksus.dll?pv1410=54&k=omron+g5v-2+dc5&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25
> 
>  would it work if I added wire leads to fit the circuit board spacing? 
>   Thanks 
>   Paul T
>