Shift registers
2010-08-07 by gff_ims
Hi All , does anyone have or know where i might obtain the following 2x 128 shift registers. MF 7104 or MF50052 , both are 10 pin and cans. Regards Geoff
Thread
Shift registers
Re: [vintagesynthrepair] Shift registers
2010-08-07 by Electronic Battle
Robin at sales@... , Steve Thomas at digitana2002@... and also http://forum.thesynthi.de should be able to help. If you find a bag full of them knocking about and you have six spare, please let me know! Especially if they'r the MF7104s. best wishes Geoff Richard ----- Original Message -----
Show quoted textHide quoted text
From: "gff_ims" <> To: <vintagesynthrepair@yahoogroups.com> Sent: Saturday, August 07, 2010 10:19 AM Subject: [vintagesynthrepair] Shift registers > Hi All , does anyone have or know where i might obtain the following 2x > 128 shift registers. > MF 7104 or MF50052 , both are 10 pin and cans. > Regards > Geoff > > > > ------------------------------------ > > Yahoo! Groups Links > > >
Re: [vintagesynthrepair] Shift registers
2010-08-07 by arthurok
try ebay
----- Original Message -----From: Electronic BattleCc: afas00@...Sent: Saturday, August 07, 2010 5:25 AMSubject: Re: [vintagesynthrepair] Shift registersRobin at sales@... , Steve Thomas at
digitana2002@... and also http://forum.thesynthi.de should be able to
help. If you find a bag full of them knocking about and you have six spare,
please let me know! Especially if they'r the MF7104s.
best wishes Geoff
Richard
----- Original Message -----
From: "gff_ims" <>
To: <vintagesynthrepair@yahoogroups.com>
Sent: Saturday, August 07, 2010 10:19 AM
Subject: [vintagesynthrepair] Shift registers
> Hi All , does anyone have or know where i might obtain the following 2x
> 128 shift registers.
> MF 7104 or MF50052 , both are 10 pin and cans.
> Regards
>; Geoff
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
{Disarmed} Re: [vintagesynthrepair] Shift registers
2010-08-08 by geoff james
Hi Richard , tried all those.
I've been searching for these for 13 years---no
luck.
Thanks for your reply.
Regards
Geoff
----- Original Message -----
Show quoted textHide quoted text
From: Electronic BattleCc: afas00@...Sent: Saturday, August 07, 2010 6:25 PMSubject: Re: [vintagesynthrepair] Shift registersRobin at sales@... , Steve Thomas at
digitana2002@... and also http://forum.thesynthi.de should be able to
help. If you find a bag full of them knocking about and you have six spare,
please let me know! Especially if they'r the MF7104s.
best wishes Geoff
Richard
----- Original Message -----
From: "gff_ims" <>
To: <vintagesynthrepair@yahoogroups.com>
Sent: Saturday, August 07, 2010 10:19 AM
Subject: [vintagesynthrepair] Shift registers
> Hi All , does anyone have or know where i might obtain the following 2x
> 128 shift registers.
> MF 7104 or MF50052 , both are 10 pin and cans.
> Regards
> Geoff
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.851 / Virus Database: 271.1.1/3057 - Release Date: 08/08/10 02:12:00
Re: {Disarmed} Re: [vintagesynthrepair] Shift registers
2010-08-08 by Electronic Battle
Geoff - likewise I have been searching. Robin Wood
had some when I spoke to him a couple of years ago but the cost was a bit steep
I think. I will continue my search and if I find any I will try to remember
you. Good luck - they're rare!
What do you need them for? Is it the synthi AKS?
Apparently the MF71094s do run very hot so although mine works fine and is
likely to remiain in good order, I feel a set of spares would be a prudent
purchase. A modern day equivalent could easily be build using 74HCT TTL or
similar though.
Best wishes
Richard
----- Original Message -----
Show quoted textHide quoted text
From: geoff jamesSent: Sunday, August 08, 2010 4:53 AMSubject: {Disarmed} Re: [vintagesynthrepair] Shift registersHi Richard , tried all those.I've been searching for these for 13 years---no luck.Thanks for your reply.RegardsGeoff----- Original Message -----From: Electronic BattleCc: afas00@...Sent: Saturday, August 07, 2010 6:25 PMSubject: Re: [vintagesynthrepair] Shift registersRobin at sales@...n.co.uk , Steve Thomas at
digitana2002@... and also http://forum.thesynthi.de should be able to
help. If you find a bag full of them knocking about and you have six spare,
please let me know! Especially if they'r the MF7104s.
best wishes Geoff
Richard
----- Original Message -----
From: "gff_ims" <>
To: <vintagesynthrepair@yahoogroups.com>
Sent: Saturday, August 07, 2010 10:19 AM
Subject: [vintagesynthrepair] Shift registers
> Hi All , does anyone have or know where i might obtain the following 2x
> 128 shift registers.
> MF 7104 or MF50052 , both are 10 pin and cans.
> Regards
> Geoff
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.851 / Virus Database: 271.1.1/3057 - Release Date: 08/08/10 02:12:00