Hi, thanks, I think I have this working now. I would have replied earlier but I had an unscheduled stay in hospital.
I'm wondering..does anyone else use a name for their modular? I suggested "Dirty Knobby" to the wife and it seems to have stuck. With the Philip Dick reference it seems to fit nicely.
regards, Mark
Grant Richter wrote:
Grant Richter wrote:
>
> 1. How do I get the Borg to act as a low pass gate, I fed it an Blacet
> LFO pulse (into audio..then into CV), took out the EGs and VCA, turned
> the response up and down, no sign of the decay (someone did an
> excellent demo of this on an MP3). I tried messing carefully with the
> peak control and control change, no dice. What am I doing wrong?
Route a sine wave to Audio In. Monitor Main Out. Envelope generator to Control In.
Set Frequency all the way counter clockwise (off). Control Range all the way clockwise, Type
to LP (all the way counter clockwise) and Peaking to VCA (all the way counter clockwise until
switch clicks).
>
> 2. The two control inputs, one is marked "Control in", the other "Key
> in"..what is the second one for? Can I use it as a second CV in?
>
When used as a filter, route the 1 volt per octave keyboard control voltage going to the VCO
to Key In also. Otherwise you can use it as a general purpose CV input.