Yahoo Groups archive

Emu XL-7 & MP-7 User's Group

Index last updated: 2026-04-29 00:09 UTC

Message

Re: Main outs question

2005-03-19 by mike

Thanks for the replies!!  I've considered looking into some type of groud loop isolater, but 
was hoping to avoid spending any cash.  i should be able to get by with this one-time 
deal.  The buzzing is slightly audible only when there's silence.  I blame it all on my wife- 
she's the one that goes to church and got me roped into this =p  Since I'm new at the 
sound game I thought it'd be good to know how to solve.  I am curious about adding a 
ground wire though.  It seems to make sense if it works for the spdif out.  I also got a 
reply from Emu that suggests loosening/tightening the bottom plate screws- some type of 
sheilding issue?  Have yet to try it.

Thanks again!!
Mike

--- In xl7@yahoogroups.com, Greg Waltzer <egwaltzer@c...> wrote:
> I've found at times when there was excessive hum on my XL7 outputs, that 
> a ground lifter solved it.
> 
> flibfree@w... wrote:
> 
> >Hello all,
> >	There was a question about spdif noise a while back and I posed the 
> >possibility that it was perhaps a grounding issue.  At least one person found this 
> >to be true.  I grounded my spdif to the case and it is now dead silent.  However, 
> >the main outs and the phone jack seem to often have a buzz in them which is 
> >VERY annoying.  I've not found any fix for this that works.  I've started only using 
> >the spdif for the sound as a result.  It's possible that the mains also need to be 
> >grounded somehow, but I haven't tried to do that... 
> >	
> >	Hope that helps... Best,
> >					Flibfree ^=.=^
> >  
> >

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.