Emu XL-7 & MP-7 User's Group

Hi,

I post today for an information about how to restore a multisetup in a 
pattern. Some peaple say that you just have to insert a program change 
in a track with the value pgrm=number of the multi you want to remain 
msb=00 lsb=80.

So i test this feature but it don't work. In fact i work with different 
arp master and there aren't reminded when i change the pattern. Perhaps 
the featutre don't work to change the setup of the arp, i don't know. 

So i've tested to combine my pattern in a single multicanal but nothing 
change.

Here is my normal set up:

Each track is assign to each canal ( T1>C1A...T16>C16A )
The fx are routed to one channel for example to channel 1 in pattern 1, 
to channel 9 in pattern 2 so all the sends are recorded in the preset 
in channel 1 / 9( preset sends to 0 and control of the sends with real 
time controler like it's done in the beat garden card or in the Techno 
Synth )

The other channels are routed to differents sends ( C2A...C8A>send 
sub1, these channels are used for rythmic preset and the other are send 
to send sub 2 or send main 1 or 4.
One of theses channel use a master arp which is different for each 
pattern.

What i want to do is to change the arp master and the fx channel 
assignment of each pattern but this program change don't work. Maybe i 
have to do a program change with a lsb value of 79. I don't know.

If someone have an idea or a solution...Any help would be appreciated.

Good week end 

Adrien