Thanks for all the input. I got things up and running. Still need to do some tweaking to the Karma, but those questions are for another group. Thanks again. -Greg --- In xl7@yahoogroups.com, "nifflas <nifflas@m...>" <nifflas@m...> wrote: > I have the Emagic AMT-8 MIDI interface, but use it as midi router, > splitter and merger (at the same time). Sloves all the problems about > how to chain the gear together... > > //Nifflas > > --- In xl7@yahoogroups.com, drK <drk@d...> wrote: > > On 12/17/02 3:33 PM, "Greg <golerage@y...>" <golerage@y...> wrote: > > > > > Would it be better to seperate the two pieces of hardware and > > > dedicate each to its own channel on the 2x2? Can the XL7 have > > > multiple sources giving it commands? > > > > > > > The XL-7 has only a single MIDI input so it can respond to at most > sixteen > > external MIDI channels. These can originate from any combination of > the PC > > or the KARMA when you are using the PC running your sequencer. > > > > The 2x2 setup per my recommendation in the previous posy will work > quite > > well to do what you are looking to do, and you will not be required > to > > change cables. > > > > the only advantage you could gain from adding any additional > hardware, or > > changing the configuration would be to take advantage of the XL- 7's > 32 > > channel sequencing capabilities. The current setup will at most > allow the > > XL-7 to control only 16 channels of external MIDI, either on the PC > or in > > the KARMA in any combination. If you add an additional single > input MIDI > > interface to your PC you could then send 32 channels to the PC > which could > > be split between the KARMA (full 16) and software instruments. > > > > An alternative would be the following configuration using the > single 2x2: > > > > XL-7 MIDI OUT A -> MIDI SPORT IN A > > XL-7 MIDI OUT B -> KARMA MIDI IN > > KARMA MIDI OUT -> MIDI SPORT IN B > > MIDI SPORT OUT B -> XL-7 MIDI IN > > MIDI SPORT OUT A -> (not used) > > > > This lets you have the XL-7 control both 16 KARMA channels and 16 PC > > software instrument channels at the same time. It also lets the > KARMA > > control either the PC or the XL-7. The THRU button trick mentioned > > previously still works so the XL-7 and the KARMA can play together > without > > recabling and the computer out of the picture. > > > > What do you loose? The KARMA can not be directly controlled by the > PC. All > > KARMA control will have to originate or pass through the XL-7. > > > > Given how inexpensive USB MIDI interfaces are these days I would > recommend > > adding an additional MIDI port to the PC and bringing in the XL-7 B > output > > that way. That would give you the most flexibility and power. > > > > drk > > > > www.delora.com/music > > www.mp3.com/zdrk > > drk.iuma.com
Message
Re: I need my hand held - midi chaining question
2002-12-18 by Greg <golerage@yahoo.com>
Attachments
- No local attachments were found for this message.