Xpantastic!

Karl,

The mod matrix page is accessed through the "Misc" page, correct?  So the implementation is based on hardware that already exists on the Xpander i.e. you wouldn't be giving up any other buttons.  

So the big question is:  would the mod matrix become available if you used M12 roms in the Xpander?  Has anyone tried?  I too could easily give up the cv/gate ins... 

--- In xpantastic@yahoogroups.com, Karl Schmeer <shire03@...> wrote:
>
> Hi Matt,
> 
> I should have been more clear. I am assuming the digital boards of both the 
> Xpander and the M12 are the same.
> I really don't know if they are, but if so, it would seem you could take a set 
> of coppied ROMs from an M12 and put them into an Xpander.  Giving the Xpander 
> the Modulation list page. However since the M12 roms never supported 
> 
> the 6 CV/gate  inputs they would not exsist to the firmware.
> 
> On th M12, the modulation page gives you a list of all 20 modulation routings. 
> You can change the amount or the destination. IÂ find it most useful to delete 
> unused ones when I need more for some reason. 
> 
> But there is a bug. If you access the modulation page, for some reason it turns 
> off any quantization you may have set up.
> 
> Best Regards
> 
> Karl
> 
> 
> ________________________________
> From: vrazomatt <vrazomatt@...>
> To: xpantastic@yahoogroups.com
> Sent: Thu, August 4, 2011 10:56:27 AM
> Subject: [xpantastic] Re: Why no Xpander mod. matrix implementation?
> 
> >Karl,
> 
> >I presume you are talking about the 6 cv/gate inputs (not the CV pedal inputs, 
> >which I assume the M12 has as well)? If so, there is no direct CV-as-mod-source 
> 
> >ability now, so I'm not sure why this would have to be addressed in the 
> >mod-matrix? 
> 
> 
> >From my understanding, the mod matrix is just a compendium of all mod routings, 
> 
> >addressed though the already existing "misc" page, so no additional coding would 
> >
> >be necessary. 
> 
> >Anyways, I guess this is all just academic unless someone feels like writing 
> >something up!:) 
> 
> > 
> > Am 04.08.2011 08:59, schrieb Karl Schmeer:
> > >
> > > So if even if someone copied
> > > the ROMs from an M12 and was successful in getting it to work in an 
> > > Xpander. you would still lose the
> > > code to control the CV inputs.
> > >
> > >
> > > Best Regards
> > >
> > > Karl
> > >
> >
>