On Monday, November 25, 2013, Rikard Latvala wrote:
Hey,about the light bulb, check if a well stocked gas station has them,I think I've seen these 24v5w bulbs used in cars.If i remember correctly the squarewave output can be probed at TP4on the M-card, and VR12 adjusts its output level. The trimpots used in theCS 50/60/80 are in need of replacement, or atleast some adjustmentfrom time to time.
Skickat från min iPadHi, thanks for the group, lots of good info!
I recently acquired a CS60, that mostly works pretty well.
The first, and easiest issue is to find out a modern replacement for the Touch Response light bulb. I'm having some trouble finding a 24v5w equivalent. The #1864 seems close, but is 28v, and I'm not even sure it is the correct base size.
The only other issue I've found (other than the need for a good tuning touch-up) is that the 3rd voice does not pass Square, Saw, or Noise. The Sine wave works great, and all other cards work fully.
Where can I start? I've read a few posts here about it possibly being the Wave Shaper or maybe the VCF or VCF master level?
Thanks!
lee.