Yamaha CS80

Thanks,

 

I’ll be home next weekend and will try it.  

 

Stanley Valiulis 

Co-Founder Totesbabies.com

815-608-0884

 

 

 

 

From: <yamahacs80@yahoogroups.com> on behalf of "Alexander Botrie alexander488@... [yamahacs80]" <yamahacs80@yahoogroups.com>
Reply-To: <yamahacs80@yahoogroups.com>
Date: Thursday, October 17, 2019 at 3:01 PM
To: <yamahacs80@yahoogroups.com>
Subject: Re: [yamahacs80] Questions About Kenton Midi Kit

 

  

Ok thanks Stan! 

 

Here is a link for the manual if you don’t have a copy:

 

https://e2e1b79f5c29ba831adc..b-cdn.net/wp-content/uploads/2019/06/cs804201.pdf

 

 

On Oct 17, 2019, at 10:55 AM, Stanley Valiulis scvaliulis@... [yamahacs80] <yamahacs80@yahoogroups.com> wrote:

 

 

Hi Alex,

 

I have the midi control in mine but never used it.  I will try it and let you know what mine does.  It will be about a week.  

 

Stan

 

 

 

 

 

 

From: <yamahacs80@yahoogroups.com> on behalf of "alexander488@... [yamahacs80]" <yamahacs80@yahoogroups.com>
Reply-To: <yamahacs80@yahoogroups.com>
Date: Wednesday, October 16, 2019 at 10:57 AM
To: <yamahacs80@yahoogroups.com>
Subject: [yamahacs80] Questions About Kenton Midi Kit

 

  

Hello everyone,

 

I recently had a Kenton Midi Kit installed into a CS80.. It looks like something was not done correctly during the installation, since the mod and pitch wheels are not working. I have tried 2 different controllers; notes are being triggered, aftertouch and program changes work, but the wheels do not. It does not matter if the toggle switch is up or down.. I have tried to reset the midi mode, which returns everything to the default settings, but no success. Has anyone else had a similar experience?

 

Also I am not sure if the red button is working properly. I spoke with Harry at Kenton, and when you enter midi program mode (by hitting the button 2 times in succession) there should be no sound being triggered in the CS80 when you play different keys on the controller, to assign different midi settings. But when I am in the midi program mode, the CS is still playing notes from the controller. The transpose mode does seem to be working. Harry was not 100% sure there should be no sound, since he did not have a CS80 in the shop. Can anyone tell me if I should here notes triggered from the CS while its in midi program mode?

 

Any help would be greatly appreciated!

 

Best regards,

 

Alex

 

 





[Non-text portions of this message have been removed]