200e

another good one that i'm listening to now.

the same 291e setup in "control voltage" mode.

cv1 output from a 250e into the cv input of the 291e. 

all stages on the 250e set to the "blank" range (it's the one after "all" and before "0-2"). all stages have interpolation on. all stages set to "Adv" mode. time range for every stage is ".6-6". time mult is turned to the right to 6. all time knobs are turned to the right. press start.

in the "blank" range each stage outputs a voltage proportional to its numeric value. so stage 1 is ~.635 V, stage 2 is ~1.27v, ... stage 16 is ~10v. so when stage 1 plays it slews between 0v and ~.6v, stage 2 slews from 0v to 1.2v...stage 16 slews from 0v-10v. and each of these interpolations takes ~24 seconds. so lots of long, hypnotic, and slightly changing sweeps.

ok, i'm going to sleep now.

thanks,

-jon