68300

Robert

The programming algorithms from P&Em in, most cases,  are configured for 
CSBOOT. If it is the same type of flash, you can make a renamed copy of 
the algorithm and change the header pasrt of the file to turn off CSBOOT 
and turn on CS8. Instructions for doing this are in a file called 32p.doc

If you have problems doing this, log on to P&E's we site 
(www.pemicro.com), go to the flash programming algorithms section and do 
a request for a programming algorithm file. There is currently no charge 
for these algorithms.

Regards
Dave Perreault

Robert Yablonski wrote:

>Group,
>
>I have a 68332 on which I have two flash chips.  The first is use for 
>boot.  It resides at address 0 and is chip selected by CSboot.  The second 
>resides at address 0 and is selected by CS8.   I am using PROG32 to load 
>the flash chips.  Boot flash load works great.  I cannot get PROG32 to 
>write to the second flash.
>
>Is there any help out there.
>
>Robert E. Yablonski
>
>
>---------------------------------------------------
>To unsubscribe from this group, send an email to:
>68300-unsubscribe@yahoogroups.com
>
>To learn more about Motorola Microcontrollers, please visit
>http://www.motorola.com/mcu
>
> 
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
>
>
>
>  
>