68300

Erik,

If you are using C, I have some header and initialization files which 
may be useful in describing and using the TPU. Please let me know.

Regards,

Robert Layton

Erik Wise wrote:

> Presently I am using a TPU Channel to generate a PWM signal, and it
> works as I would like.  However, if possible I would like an
> interrupt to be generated on each rising and falling edge.  In the
> manual, there is a description of what bits to set to either assert
> or not assert an interrupt, but that is about it.  What interrupt
> vecter will be generated if I configure it to assert an interrupt?(I
> would use an ISR)  What edge will it be asserted on?  Will the
> interrupt fire immediately after the edge or before? 
>
> Thanks,
> Erik
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> <http://rd.yahoo.com/M=245454.2994396.4323964.2848452/D=egroupweb/S=1706554205:HM/A=1457554/R=0/*http://ipunda.com/clk/beibunmaisuiyuiwabei> 
>
>
>
> ---------------------------------------------------
> To unsubscribe from this group, send an email to:
> 68300-unsubscribe@yahoogroups.com
>
> To learn more about Motorola Microcontrollers, please visit
> http://www.motorola.com/mcu
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service 
> <http://docs.yahoo.com/info/terms/>.




[Non-text portions of this message have been removed]