68300

Good Morning,

I have a question about this topic of P&E wiggler used with 68332 QSPI. 
P&E does a nice job with supporting programming of Flash via the BDM
port.  

Please advise me on using the BDM with 68332.  Has anyone used the
wiggler to support a manufacturing operation to write a board serial
number to each of 4 serial eeproms hanging off the QSPI? 

Thanks,

Frank

Melear Charles-rdph40 wrote:
> 
> Hello everyone,
> 
> The old PE software "bit banged" the signals on the parallel port.  Thus,
> the effective "bit times" become a function of the system clock of the PC.
> If you are running a fast PC with the old PE software, the signals on the
> parallel port will be too fast.  There is some DOS command to add the
> equivalent of wait states to the parallel port.  I imagine that this is your
> problem.
> 
> Bye the bye, I have known the folks at PE for a bunch of years and they are
> very responsive folks.  They always help me.
> 
> Regards,
> 
> Charlie
> 
> -----Original Message-----
> From: Martin McGrath [mailto:mcgrath@...]
> Sent: Wednesday, May 28, 2003 4:24 PM
> To: 68300@yahoogroups.com
> Subject: Re: [68300] P&E BDM wiggler
> 
> Hi,
> 
>   Have you tried asking P&E Micorsystems directly?  They have a web site at:
> 
>     http://www.pemicro.com/ <http://www.pemicro.com/>
> 
>    or P&E Microsystems Phone: 617-353-9206
> 
> and I have always found them to be very responsive.
> (I have no business interest in the company but regard them highly).
> 
>   --Marty McGrath
> 
> ^^^^^^^^^^^^^^^^^^
> >
> >Has anyone had problems getting a P&E BDM wiggler (parallel port)
> >to work on a laptop computer using a parallel port adapter?
> >
> >New laptops these days don't have "real" parallel ports these days so
> >I had to get a PC-Card parallel port adapter.
> >
> >The adapter says that it is 1284 compatible.  It does communicate
> >with a printer.  The P&E software will not recognize the target
> >system.  Worked on my old laptop just fine.
> >
> >Ideas?
> >
> >
> >
> >
> >
> >---------------------------------------------------
> >To unsubscribe from this group, send an email to:
> >68300-unsubscribe@yahoogroups.com
> >
> >To learn more about Motorola Microcontrollers, please visit
> > http://www.motorola.com/mcu <http://www.motorola.com/mcu>
> >
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> <http://docs.yahoo.com/info/terms/>
> >
> >
> 
> _________________________________________________________________
> MSN 8 with e-mail virus protection service: 2 months FREE*
> http://join.msn.com/?page=features/virus
> <http://join.msn.com/?page=features/virus>
> 
> Yahoo! Groups Sponsor
> 
> <http://rd.yahoo.com/M=251812.3170658.4537139.1512248/D=egroupweb/S=17065542
> 05:HM/A=1564415/R=0/*http://www.netflix.com/Default?mqso=60164784&partid=317
> 0658>
> 
> <http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1512248/D=egroupmai
> l/S=:HM/A=1564415/rand=153101319>
> 
> ---------------------------------------------------
> To unsubscribe from this group, send an email to:
> 68300-unsubscribe@yahoogroups.com
> 
> To learn more about Motorola Microcontrollers, please visit
> http://www.motorola.com/mcu <http://www.motorola.com/mcu>
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
> 
> [Non-text portions of this message have been removed]
> 
> 
> ---------------------------------------------------
> To unsubscribe from this group, send an email to:
> 68300-unsubscribe@yahoogroups.com
> 
> To learn more about Motorola Microcontrollers, please visit
> http://www.motorola.com/mcu
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> 
> The data contained in, or attached to, this e-mail, may contain confidential
> information. If you have received it in error you should notify the sender
> immediately by reply e-mail, delete the message from your system and contact
> +44(0)1332 242424 (the Rolls-Royce IT Security Director) if you need
> assistance. Please do not copy it for any purpose, or disclose its contents
> to any other person.
> 
> An e-mail response to this address may be subject to interception or
> monitoring for operational reasons or for lawful business practices.
> 
> (c) 2003 Rolls-Royce plc
> 
> Registered office: 65 Buckingham Gate, London SW1E 6AT
> Company number: 1003142. Registered in England.

[Non-text portions of this message have been removed]