68300

Jochem,

www.cygwin.com will get you a full blown GNU environment. In any case
you'll need Cygwin in case you want to switch to the gnu tools suite in
combination of a working and up to date gdb with bdm. The gnu tools for
the m68k you can download from the website that is to be found here:
http:// www.davehylands.com/avi/index.htm 

I agree that it is nice and better to understand the code but
reinventing the BDM wheel is nice but takes a lot of time. I guess you
want to write code for your board as well :-)

Avi.

> -----Original Message-----
> From: 68300@yahoogroups.com [mailto:68300@yahoogroups.com] On 
> Behalf Of jochen_stroebel
> Sent: Thursday, 15 September, 2005 15:20
> To: 68300@yahoogroups.com
> Subject: [68300] Re: P&E Micro CPU32 BDM Interface
> 
> Hello Avi,
> 
> i habe the driver package from sourceforge, but no 
> possibility to build it, because i dont have the 
> GNU-Develloping tools on my computer... and its always better 
> to understand if you can play with the code :-) if i had a 
> running Programm for Windows XP/2000 i would not write one.. 
> and the old Dos-based BDM Software Did not work on my 
> Computer or the Notebook :-(
> 
> so long
> 
> Jochen
> 
> --- In 68300@yahoogroups.com, "Avi Cohen Stuart" 
> <avi.cohenstuart@s...> wrote:
> > Jochen,
> > 
> > The BDM driver mentioned on the sourceforge.net works flawless on 
> > XP/2000 using giveio.sys. There is no need to write another driver.
> I
> > tried on w2k to write a driver but it was a hell of job and it is
> much
> > slower that using giveio.sys as is being used in the BDM project. I 
> > don't mind you write a driver but you might
> fall
> > in the trap that you are making tools all the time (like me... got a
> > '332 with the TPU already 4 years ago including the TPU assembly
> book
> > but never even made a program using the TPU... yet :-)
> > 
> > Avi.
> > 
> > > -----Original Message-----
> > > From: 68300@yahoogroups.com 
> [mailto:68300@yahoogroups.com] On Behalf 
> > > Of jochen_stroebel
> > > Sent: Wednesday, 14 September, 2005 10:30
> > > To: 68300@yahoogroups.com
> > > Subject: [68300] Re: P&E Micro CPU32 BDM Interface
> > > 
> > > --- In 68300@yahoogroups.com, "Aaron J. Grier" <aaron@f...> wrote:
> > > > On Tue, Sep 13, 2005 at 06:53:08AM -0000, jochen_stroebel wrote:
> > > > > > p&e still sells BDM interfaces for CPU32 processors.
> > > > > > http://www.pemicro.com/ .
> > > > > 
> > > > > Yes, but for a Student ist a little expensive, if you see the
> > > little
> > > > > logic function the GAL has to do, perhaps someone has at
> > > least the
> > > > > pinout with the signals on the Parallel-Port-Side of the
> > > P&E Micro
> > > > > Interface for CPU32, so i can adapt my homemade PD-BDM-
> Interface
> > > on
> > > > > Parallelportcable?
> > > > 
> > > > you could use the GNU debugger with your existing PD-BDM-
> Interface.
> > > 
> > > I will do it so, if all other way fail.
> > > My homemade PD-BDM Interface is not testet completely, yet and i 
> > > plan to write my own litte BDM Driver for it under Windows XP/2000
> > > 
> > > > > > there is also a reverse-engineered schematic and source code
> > > for a
> > > > > > GAL to build a P&E compatible BDM interface at 
> > > > > > http://sourceforge.net/projects/bdm/ .
> > > > > Yes, I see but there is only the discription Motorola IDC
> > > compatible
> > > > > BDM cable, does it work with Codewarrior for 68k and my QUICC
> > > Board
> > > > > from Motorola?  (I am not complete shure the Motorola IDC
> > > compatible
> > > > > BDM cable ist complete equal (on parallel port side) to the
> > > P&E ?!? )
> > > > 
> > > > the ICD32 part is/was made by P&E.  it is the same part.
> > > 
> > > Many thanks, this was the missing Information, I needed.  :-)
> > > 
> > > 
> > > > > One more question, ist the Wiggler IDC compatible, too?
> > > > 
> > > > I do not know.
> > > > 
> > > > -- 
> > > >   Aaron J. Grier  |   Frye Electronics, Tigard, OR   |  
> aaron@f...
> > > 
> > > 
> > > 
> > > 
> > > ------------------------ Yahoo! Groups Sponsor 
> > > --------------------~--> Most low income households are 
> not online. 
> > > Help bridge the digital divide today!
> > > http://us.click.yahoo.com/cd_AJB/QnQLAA/TtwFAA/dN_tlB/TM
> > > --------------------------------------------------------------
> > > ------~->
> > > 
> > >  
> > > Yahoo! Groups Links
> > > 
> > > 
> > > 
> > >  
> > > 
> > > 
> > >
> 
> 
> 
> 
> ------------------------ Yahoo! Groups Sponsor 
> --------------------~--> Get Bzzzy! (real tools to help you 
> find a job). Welcome to the Sweet Life.
> http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/dN_tlB/TM
> --------------------------------------------------------------
> ------~-> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
>