AVR-Chat

Hello John,

I suggest you post your actual code in case someone can spot the problem
- I have lost count of the times that my actual code is not the same as
the code I thought I had written!


-- 
Tim Mitchell
tim@sabretechnology.co.uk http://www.sabretechnology.co.uk
Sabre Technology (Hull) Ltd, 3a Newlands Science Park, Hull HU6 7TQ
Registered in England and Wales no.3131504
t:01482 801003 f:01482 801078

Thanks Cat & Tim,

<<Laugh, scream, curse>>
The internal oscillator was enabled!
Apparently if the reset went wrong in just the right way, it would use
the external oscillator I have connected.
That is why 7372800Hz / 256 / 64 = 70Hz !

Thanks again for the support.

Regards,
  JJ


On Wed, Jun 11, 2008 at 3:56 AM, Tim Mitchell <tim@sabretechnology.co.uk> wrote:
> Hello John,
>
> I suggest you post your actual code in case someone can spot the problem
> - I have lost count of the times that my actual code is not the same as
> the code I thought I had written!
>
> --
> Tim Mitchell
> tim@sabretechnology.co.uk http://www.sabretechnology.co.uk
> Sabre Technology (Hull) Ltd, 3a Newlands Science Park, Hull HU6 7TQ
> Registered in England and Wales no.3131504
> t:01482 801003 f:01482 801078
>
> 



-- 
Regards,
 JJ

http://www.pcbgcode.org