Boss VF-1 Effect Processor

Hmmm...I have not experienced this problem. Are you configuring/calibrating the pedal for each button? Sometimes the customization of the unit causes more work, but it's worth it in the end.  I wish the unit had a feature so that you could create a global configuration change (like CC # or midi change #, etc for an express pedal) with a single set of steps rather than having to do it fo each button.

Kris

  ----- Original Message ----- 
  From: Eddy Naim 
  To: BossVF1@yahoogroups.com 
  Sent: Tuesday, November 07, 2006 4:47 PM
  Subject: Re: [BossVF1] Re: Hi; Midi Controller


  I found the FCB1010 to be a bit of a pain in the ass... once I've 
  configured the expression pedal and set the pressed pedal as value 0, it 
  quickly goes out of synch, and when I press the pedal all the way it 
  doesn't reach the peak value.

  But it's definitely sturdy and flexible.

  Eddy

  Rod Smith wrote:
  >
  > The FCB1010 works very well with the VF-1 with the standard Behringer 
  > firmware
  > (v.2.4.1 or later). There's also a user-developed unofficial firmware 
  > (UnO) which
  > you can purchase very cheaply from several sources. The UnO firmware 
  > makes using
  > the FCB1010 in "stompbox" mode very simple. There are also several 
  > software
  > editors available for download - these make programming a little 
  > easier. Check out
  > the FCB1010 Yahoo group - there's always lots of good stuff in there. 
  > I like the
  > 1010 because once you get past the programming it can be very flexible 
  > and can grow
  > with your rig.
  >
  > Best,
  > Rod
  >
  >
  >
  > 



   

[Non-text portions of this message have been removed]