steve_the_composer wrote: > I just did a test. There was a grounding problem hum on the PC audio > when the CZ and PC were connected (MT red record to PC mic in). Sometimes I've found that you can red rid of grounding hum by disconnecting the ground from one of the connected devices. This is easy with european Schuko plugs ( http://kropla.com/!f.htm ,) by taping over the grounding strips on the plug. Depending on the type of plug it might be more or less tricky, and/or impossible. Also beware of the risks for running a device designed to be grounded without grounding! Another option is to experiment with running the devices in the same or totally different (usually at the other end of th house ;) outlets. Both may sometimes aid in killing the ground loop. On the other hand a ground loop is a steady hum, and modern audio software can remove hum when given a sample with a bit of just the hum and nothing else :) .max -- Max Romantschuk http://max.nma.fi/
Message
Re: [CZsynth] CZ-5000 MT to PC audio save-load-verify test
2004-06-03 by Max Romantschuk