Casio CZ/ VZ/ FZ - Pro Series

Sounds similar to my problem as well.  I need to take the thing apart
one of these days and see if I can do anything with it.  What is the input
voltage requirements for the CZ1000?  I'm using an adaptor that may be
slightly over the voltage that's used, I no longer have the original
adaptor.  I think it's something like 9V.

----- Original Message ----- 
From: "noisykelly2004" <noisykelly2004@...>
To: <CZsynth@yahoogroups.com>
Sent: Monday, August 09, 2004 2:36 PM
Subject: [CZsynth] Broken CZ5000 part 2...can anyone translate this??


Casio CZ 5000 1985
No function,LEDs or LCD display
The only convenient 0V point for the TTL I could
find was the -ve pin of the ps bridge rectifier.
No 5V for the TTL. It looks as though the keyboard had been
dropped as the large electrolytic on the ps had moved and
consequently the track continuity to the 5V regulator part of
the ps was broken under the capacitor pin,not obvious at al.
With all 3 connectors unplugged and PA order on main pcb
not the ps end which is different order.
PA 0,15.3,-16,0,5.6,0,5.2,0,5.2
PC 0,0.03,5.2
PD 0,16,15.3,0,0

I found the above on a website...it sounds almost identical to my
problem...can anyone spell it out a bit more as to where i should be
looking for this capacitor pin..as i am no expert in these maters.
Any help would lift my day.thanks.....
*NK





Yahoo! Groups Links