Casio CZ/ VZ/ FZ - Pro Series

>I don't have a manual, and I'm not succeeding at setting up a multi-
>channel setup.
>For starters, if I hit the Multi-Channel button, the display shows an
>internal sound, then POLY=0 is blinking.  If I put the cursor on the
>0, I can't change the value.  The Value slide doesn't change it, or
>any other key. So I don't hear that sound. Does it take a keystroke
>combination ?  The slide will change the channel or level, but not
>the poly.
>
>I can't get the cursor on the (OUT1) output field either.  If I put
>change my keyboard's midi channel, I can hear that someone has put a
>sound on a channel or two, but I can't do anything with it.

The output channel is fixed- channels 1-4 go to OUT1 and 5-8 go to OUT2.  
Each set of 4 channels has 8 voices (corresponding to the two sound 
generator chips) that are allocated using the POLY parameter.  Scroll 
through the other channels (using the page up/down buttons) and turn the 
POLY parameter down to 0 for channels 1-4, then you can set POLY to 8 on 
channel 1- it's locked at 0 on channel 1 because you can't have more than 8 
voices assigned for each output/set of 4 channels.

_________________________________________________________________
Get ready for school! Find articles, homework help and more in the Back to 
School Guide! http://special.msn.com/network/04backtoschool.armx