My CZ5000 was doing this same thing. It was the rubber pad that is glued to the center keyboard support under the top panel. It had fallen into the synth because the glue was old. Then the top panel was shorting out on the support causing the synth to reboot. The clue was every time any pressure was put on the top button panel it reset. This may not be the problem but it's a good place to start. This is probably related to the lights being on when no one is home. There is a short on the board somewhere to latch all those leds on. Good luck, Fran --- In CZsynth@yahoogroups.com, "jaicensolo1983" <jaicensolo1983@...> wrote: > > Any idea what's causing my CZ to randomly re-set itself?? > > It turns on fine, and plays fine, but every now and then, it will > reset itself, and go back to internal patch A1 (Brass Ens). Also, the > Tone Mix, Key Split, Normal and MIDI buttons are always lit, but can > still be used. > Very strange I know, my first thought would be a power supply issue, > but the button thing makes me wonder. Of course it could be unrelated, > but I'd like to see if anyone else has any ideas. >
Message
Re: CZ3000 Problem
2008-03-03 by narfman96