Casio CZ/ VZ/ FZ - Pro Series

No, the CZ will not have an output without the relay. However, if you 
really know what you are doing, you can bypass the relay circuit by 
removing the relay and placing jumpers across the relay output contacts 
on the board. It is very easy if you can solder. You will need a CZ 
schematic to do this if you are unsure which contacts on the relay are 
the outputs. If you do this, be sure to turn on your CZ before turning 
up you mixer or amplifier volume to prevent power pops. Schematics are 
available online and some are even available in the Yahoo group.  Best 
to replace the relay. 5vdc relay will work.

Gary