My site appears to be back online:
http://templarseries.atspace.com/cz.html
The details are in CZinfo and manual and DEFEATING HANDSHAKING links - those details I have used with the 101 and 230s and they do work - it is just a matter of getting your head around it.As was said here - if there is a dump from keyboard protocol - use that - if not (as with the CZ101) then you have to prompt the keyboard from the MIDI in socket by sending a "Send SYSx" code - and wait for the reception from the midi out.With MIDI ox I use TWO instances of the program at once - first set up one version to ONLY receieve on from the OUT socket of the keyboard and set it up ready to get SYSX manually.
Use the other version to ONLY transmit (in the devices dialogue) and send the prompt from this instance of the program,and the other instance will pick up the SYSx code from the 101. From there,dump it as a SYSx file to the PC and from then on you can send it back to the keyboard with no further messing about - it will accept the SYSx without any handshaking. Hope that helps.
--- On Mon, 30/5/11, steve_the_composer <smw-mail@...t> wrote:
From: steve_the_composer <smw-mail@...>
Subject: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
To: CZsynth@yahoogroups.com
Date: Monday, 30 May, 2011, 16:00
Your setup will be based on (1) your internal VZ settings and (2) your midi connections between the VZ and your PC. I believe that once you have those set up correctly, you just go into sysex mode in midi-ox and trigger the bulk dump from the VZ itself. I suppose you could trigger the dumps from midi-ox by inputting the correct sysex command, but (1) that's more work and (2) it would depend on your internal VZ settings.
Oh. You asked about the cz-101. Silly me; I saw that the thread was about the VZ!!!
Never Mind.
--- In CZsynth@...m, "Karl H. May" <kmay@...> wrote:
>
> Can someone please upload the midi ox settings to save and load cz101
> sounds. Thanks, Karl May
>
> ________________________________
>
> From: CZsynth@yahoogroups.com [mailto:CZsynth@yahoogroups.com] On Behalf
> Of cwjall
> Sent: Thursday, 26 May 2011 11:30 PM
> To: CZsynth@yahoogroups.com
> Subject: [CZsynth] Midiox settings to transmit and receive syx file to
> the Casio VZ1
>
>
>
>
> I have just uploaded a guide on how to transmit and receive syx file to
> your VZ-1 using Midiox. These are my settings. It works great for me!
>
> The file is in the "VZ - DOCs" folder.
>
> If it helps just let me know.
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]Message
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-30 by Lee Borrell