To my knowledge it dumps one at a time - if there is a string to dump the whole contents I'd love it too as obviously one by one takes time to dump the entire memory. A program loop obviously makes short work of it.
--- On Tue, 31/5/11, Karl H. May <kmay@...> wrote:
From: Karl H. May <kmay@...>
Subject: RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
To: CZsynth@yahoogroups.com
Date: Tuesday, 31 May, 2011, 2:23
Hi Charles,
Can you give me a full sysex string you use to dump a single sound to
your Atari and indicate which patch number ( 1-16 ) the string is
requesting?
Do you know whether the cz101 will dump and load whole banks at once, or
only single sounds? I have seen conflicting comments on this issue. If
it will dump the whole bank, can you give me the string to command it to
do this?
Many thanks, Karl May
________________________________
From: CZsynth@yahoogroups.com [mailto:CZsynth@yahoogroups.com] On Behalf
Of charlie midi gfa
Sent: Tuesday, 31 May 2011 9:18 AM
To: CZsynth@yahoogroups.com
Subject: Re: [CZsynth] Re: Midiox settings to transmit and receive syx
file to the Casio VZ1
you can just send the whole handshaking string as one command ,
instead of waiting for the responce (s) from the cz ,,
charles
----- Original Message -----
From: "Karl H. May" <kmay@...
<mailto:kmay%40brayecragg.com.au> >
To: <CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> >
Sent: Monday, May 30, 2011 4:47 PM
Subject: RE: [CZsynth] Re: Midiox settings to transmit and receive syx
file
to the Casio VZ1
> Thanks Lee. When I ask the cz101 to dump it's memory it responds with
> the sysex string FO 44 00 00 70 30 F7. What do I do in response to
that?
> Many thanks, Karl May
> ________________________________
>
> From: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com>
[mailto:CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> ] On
Behalf
> Of Lee Borrell
> Sent: Tuesday, 31 May 2011 1:28 AM
> To: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com>
> Subject: Re: [CZsynth] Re: Midiox settings to transmit and receive syx
> file to the Casio VZ1
>
>
>
>
> My site appears to be back online:
> http://templarseries.atspace.com/cz.html
> The details are in CZinfo and manual and DEFEATING HANDSHAKING links -
> those details I have used with the 101 and 230s and they do work - it
is
> just a matter of getting your head around it.As was said here - if
there
> is a dump from keyboard protocol - use that - if not (as with the
CZ101)
> then you have to prompt the keyboard from the MIDI in socket by
sending
> a "Send SYSx" code - and wait for the reception from the midi out.With
> MIDI ox I use TWO instances of the program at once - first set up one
> version to ONLY receieve on from the OUT socket of the keyboard and
set
> it up ready to get SYSX manually.
> Use the other version to ONLY transmit (in the devices dialogue) and
> send the prompt from this instance of the program,and the other
instance
> will pick up the SYSx code from the 101. From there,dump it as a SYSx
> file to the PC and from then on you can send it back to the keyboard
> with no further messing about - it will accept the SYSx without any
> handshaking. Hope that helps.
>
> --- On Mon, 30/5/11, steve_the_composer <smw-mail@...
<mailto:smw-mail%40prodigy.net>
> <mailto:smw-mail%40prodigy.net> > wrote:
>
> From: steve_the_composer <smw-mail@...
<mailto:smw-mail%40prodigy.net>
> <mailto:smw-mail%40prodigy.net> >
> Subject: [CZsynth] Re: Midiox settings to transmit and receive syx
file
> to the Casio VZ1
> To: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com>
<mailto:CZsynth%40yahoogroups.com>
> Date: Monday, 30 May, 2011, 16:00
>
>
>
> Your setup will be based on (1) your internal VZ settings and (2) your
> midi connections between the VZ and your PC. I believe that once you
> have those set up correctly, you just go into sysex mode in midi-ox
and
> trigger the bulk dump from the VZ itself. I suppose you could trigger
> the dumps from midi-ox by inputting the correct sysex command, but (1)
> that's more work and (2) it would depend on your internal VZ settings.
>
> Oh. You asked about the cz-101. Silly me; I saw that the thread was
> about the VZ!!!
>
> Never Mind.
>
> --- In CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com>
<mailto:CZsynth%40yahoogroups.com> ,
> "Karl H. May" <kmay@...> wrote:
>
> >
>
> > Can someone please upload the midi ox settings to save and load
cz101
>
> > sounds. Thanks, Karl May
>
> >
>
> > ________________________________
>
> >
>
> > From: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com>
<mailto:CZsynth%40yahoogroups.com>
> [mailto:CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com>
<mailto:CZsynth%40yahoogroups.com> ] On
> Behalf
>
> > Of cwjall
>
> > Sent: Thursday, 26 May 2011 11:30 PM
>
> > To: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com>
<mailto:CZsynth%40yahoogroups.com>
>
> > Subject: [CZsynth] Midiox settings to transmit and receive syx file
to
>
> > the Casio VZ1
>
> >
>
> >
>
> >
>
> >
>
> > I have just uploaded a guide on how to transmit and receive syx file
> to
>
> > your VZ-1 using Midiox. These are my settings. It works great for
me!
>
> >
>
> > The file is in the "VZ - DOCs" folder.
>
> >
>
> > If it helps just let me know.
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]Message
RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-31 by Lee Borrell