Thanks everyone for your comments. No new information has yet come to light. If anyone is currently successfully using a pc to load and save cz101 patches please contact me. Thanks again, Karl May ________________________________ From: CZsynth@yahoogroups.com [mailto:CZsynth@yahoogroups.com] On Behalf Of Lee Borrell Sent: Tuesday, 31 May 2011 5:25 PM To: CZsynth@yahoogroups.com Subject: RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1 To my knowledge it dumps one at a time - if there is a string to dump the whole contents I'd love it too as obviously one by one takes time to dump the entire memory. A program loop obviously makes short work of it. --- On Tue, 31/5/11, Karl H. May <kmay@... <mailto:kmay%40brayecragg.com.au> > wrote: From: Karl H. May <kmay@... <mailto:kmay%40brayecragg.com.au> > Subject: RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1 To: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> Date: Tuesday, 31 May, 2011, 2:23 Hi Charles, Can you give me a full sysex string you use to dump a single sound to your Atari and indicate which patch number ( 1-16 ) the string is requesting? Do you know whether the cz101 will dump and load whole banks at once, or only single sounds? I have seen conflicting comments on this issue. If it will dump the whole bank, can you give me the string to command it to do this? Many thanks, Karl May ________________________________ From: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> [mailto:CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> ] On Behalf Of charlie midi gfa Sent: Tuesday, 31 May 2011 9:18 AM To: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> Subject: Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1 you can just send the whole handshaking string as one command , instead of waiting for the responce (s) from the cz ,, charles ----- Original Message ----- From: "Karl H. May" <kmay@... <mailto:kmay%40brayecragg.com.au> <mailto:kmay%40brayecragg.com.au> > To: <CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> > Sent: Monday, May 30, 2011 4:47 PM Subject: RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1 > Thanks Lee. When I ask the cz101 to dump it's memory it responds with > the sysex string FO 44 00 00 70 30 F7. What do I do in response to that? > Many thanks, Karl May > ________________________________ > > From: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> [mailto:CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> ] On Behalf > Of Lee Borrell > Sent: Tuesday, 31 May 2011 1:28 AM > To: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> > Subject: Re: [CZsynth] Re: Midiox settings to transmit and receive syx > file to the Casio VZ1 > > > > > My site appears to be back online: > http://templarseries.atspace.com/cz.html > The details are in CZinfo and manual and DEFEATING HANDSHAKING links - > those details I have used with the 101 and 230s and they do work - it is > just a matter of getting your head around it.As was said here - if there > is a dump from keyboard protocol - use that - if not (as with the CZ101) > then you have to prompt the keyboard from the MIDI in socket by sending > a "Send SYSx" code - and wait for the reception from the midi out.With > MIDI ox I use TWO instances of the program at once - first set up one > version to ONLY receieve on from the OUT socket of the keyboard and set > it up ready to get SYSX manually. > Use the other version to ONLY transmit (in the devices dialogue) and > send the prompt from this instance of the program,and the other instance > will pick up the SYSx code from the 101. From there,dump it as a SYSx > file to the PC and from then on you can send it back to the keyboard > with no further messing about - it will accept the SYSx without any > handshaking. Hope that helps. > > --- On Mon, 30/5/11, steve_the_composer <smw-mail@... <mailto:smw-mail%40prodigy.net> <mailto:smw-mail%40prodigy.net> > <mailto:smw-mail%40prodigy.net> > wrote: > > From: steve_the_composer <smw-mail@... <mailto:smw-mail%40prodigy.net> <mailto:smw-mail%40prodigy.net> > <mailto:smw-mail%40prodigy.net> > > Subject: [CZsynth] Re: Midiox settings to transmit and receive syx file > to the Casio VZ1 > To: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> > Date: Monday, 30 May, 2011, 16:00 > > > > Your setup will be based on (1) your internal VZ settings and (2) your > midi connections between the VZ and your PC. I believe that once you > have those set up correctly, you just go into sysex mode in midi-ox and > trigger the bulk dump from the VZ itself. I suppose you could trigger > the dumps from midi-ox by inputting the correct sysex command, but (1) > that's more work and (2) it would depend on your internal VZ settings. > > Oh. You asked about the cz-101. Silly me; I saw that the thread was > about the VZ!!! > > Never Mind. > > --- In CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> , > "Karl H. May" <kmay@...> wrote: > > > > > > Can someone please upload the midi ox settings to save and load cz101 > > > sounds. Thanks, Karl May > > > > > > ________________________________ > > > > > > From: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> > [mailto:CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> ] On > Behalf > > > Of cwjall > > > Sent: Thursday, 26 May 2011 11:30 PM > > > To: CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> <mailto:CZsynth%40yahoogroups.com> > > > Subject: [CZsynth] Midiox settings to transmit and receive syx file to > > > the Casio VZ1 > > > > > > > > > > > > > > > I have just uploaded a guide on how to transmit and receive syx file > to > > > your VZ-1 using Midiox. These are my settings. It works great for me! > > > > > > The file is in the "VZ - DOCs" folder. > > > > > > If it helps just let me know. > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > [Non-text portions of this message have been removed] > > > > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > > > [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Message
RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-31 by Karl H. May