Casio CZ/ VZ/ FZ - Pro Series

To my knowledge that is the only way to do it - I picked up the CZ info some time ago - but as yet have not found a complete dump mechanism - the details I have are at:
http://templarseries.atspace.com/cz.html
under "defeating handshaking".
LEE

--- On Tue, 26/7/11, Alfons Martinez <alfons-martinez@telefonica.net> wrote:

From: Alfons Martinez <alfons-martinez@telefonica.net>
Subject: RE: [CZsynth] CZ Bank Dump
To: CZsynth@yahoogroups.com
Date: Tuesday, 26 July, 2011, 19:28















 
 



  


    
      
      
      Hello Mike:



I have a CZ5000 and some time ago I tried to do the same, with no success.



Thanks to the good and detailed help from several people in the group, I

managed to send sysex messages (with Midi-Ox) for dumping each patch

(message F0 44 00 00 70 10 XX 70 31 F7, where XX is the patch number, range

20-3F).



The sysex obtained from that dump cannot be directly re-sent to the CZ5000

to re-load the patch. It is necessary to change the value of the fifth hex

value (from 30 to 20 XX, where XX is again the patch number).



Knowing this, the only thing I could achieve was to "concatenate" the 32

individual sysex (1 for each patch) in a 4 big sysex (1 for each bank). This

way, at least I can load into the CZ5000 (not save to computer) the complete

banks in one operation.



It is basically a question of copy&paste, but it worked for me. Of course,

if you change one patch in the CZ5000, you have to save it and copy&paste

again in its correponding the "big sysex".



It is not nice, but I just really wanted a backup dump, as I am not

programming new sounds normally.



I did the tedious copy&paste operation directly with Midi-Ox, that probably

is not the better program for that, but I do not know too much about editing

sysex files.



Hope it helps a little.



Alfons



_____  



De: CZsynth@yahoogroups.com [mailto:CZsynth@yahoogroups.com] En nombre de

Mike

Enviado el: martes, 26 de julio de 2011 14:51

Para: CZsynth@yahoogroups.com

Asunto: [CZsynth] CZ Bank Dump



Hello all, I have a CZ-3000 and I wanted to know if I can dump the whole

bank instead of single patches. Is there a SYSex command that would allow me

to dump the whole sound bank and not just a single patch?

Thanks in advance

Mike



[Non-text portions of this message have been removed]





    
     

    
    


 



  










[Non-text portions of this message have been removed]