I can only confirm - 101 is working with RA3.
--- On Fri, 9/3/12, k9k9dog <domgoold@...> wrote:
From: k9k9dog <domgoold@...>
Subject: [CZsynth] Re: Hello - Has anyone here dismantled a CZ-101 before?
To: CZsynth@yahoogroups.com
Date: Friday, 9 March, 2012, 22:25
none of that is normal. my cz101 worked fine with the
ra3 and i could access all patches, no automatic power
off. friend had same, no problem either.
maybe you have a contact problem in your machine, some
dirt/oxidization etc.?
--- In CZsynth@yahoogroups.com, "350ypvs@..." <350ypvs@...> wrote:
>
> Can you explain what the automatic-off power switch modification is and why
> it affects the RAM cartridge (RA3 I assume)? I have an RA3 cartridge that
> refuses to work with my 101 (and a friend's 1000), yet it works fine with
> my CZ3000 and CZ-1. I've tried replacing the battery but it still refuses
> to work with the baby CZ's :(
>
> On 9 March 2012 19:30, bill bigrig <billbigrig@...> wrote:
>
> > **
> >
> >
> > If yuo are going to open it up, you might as well do the automatic-off
> > power switch modification. Then, when you get a cartridge, you'll be able
> > to access all 16 patches in the cartridge. On a side note, I've noticed
> > that the batteries in my cartridges don't last a heck of a long time. Make
> > sure to back them up elsewhere.
> > rig
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]Message
Re: [CZsynth] Re: Hello - Has anyone here dismantled a CZ-101 before?
2012-03-10 by Lee Borrell