Casio CZ/ VZ/ FZ - Pro Series

they will be in raw imd image format for the hxc floppy emulator if you have the emulator i will be uploading to the files section once i have finished imaging them

as i have no floppy any more i cant load them and dump them from the fz1

  ----- Original Message ----- 
  From: Dom 
  To: CZsynth@yahoogroups.com 
  Sent: Monday, May 06, 2013 8:12 PM
  Subject: Re: [CZsynth] Re: CZ3000 suddenly died...


    
  well known song: 'it's your power su-pply' jammie is right, only logical explanation. 

  jammie can we have some links to some rave-ups? :) (and your collection of hardcore kick drums)

  ________________________________
  From: burnermarko <burnermarko@yahoo.com>
  To: CZsynth@yahoogroups.com 
  Sent: Monday, May 6, 2013 2:42 AM
  Subject: [CZsynth] Re: CZ3000 suddenly died...


    
  Hi, I do have the same problem. Did you
  have any success by exchanging the relay?

  --- In CZsynth@yahoogroups.com, "ROGER" <r.d.j.w@...> wrote:
  >
  > Thanks, I'll have go.
  > 
  > --- In CZsynth@yahoogroups.com, "jammie" <jammie.emma@> wrote:
  > >
  > > relay is shot just exchange for a new one or bypass its only there to stop the sudden rush of sound which can cuase a thud its there for speaker protection but if you turn down the 
  > > volume fader on mixer you can switch it on with no problem
  > > 
  > > its a common fualt and its the same for other synth yamaha used the same type circuits the sy22/33/35/55 have the same and suffer the same problem the relays burn out and stop latching
  > > ----- Original Message ----- 
  > > From: ROGER 
  > > To: CZsynth@yahoogroups.com 
  > > Sent: Monday, March 12, 2012 9:50 PM
  > > Subject: [CZsynth] CZ3000 suddenly died...
  > > 
  > > 
  > > 
  > > Apologies if question has been answered before, but old posts are hard to sieve through!
  > > 
  > > My CZ3000 died when left on for a few hours, the display etc. still works, you can switch parameters etc. but no sound... I left it off for 24 hours then tried again, still no sound. Tried Headphones, no sound that way either. Any ideas?
  > > 
  > > 
  > > 
  > > 
  > > 
  > > [Non-text portions of this message have been removed]
  > >
  >

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]