Casio CZ/ VZ/ FZ - Pro Series

atari get an ultrasatan

the floppy emulator works

no need for sample conversion awave already does it save it in the fz1 dump format

what i was saying was that i fitted the floppy emulator so my machine never had a floppy any longer so that i could not load them and dump to fz format

as the emulator is in my machine i have had to result in doing the imd hxc fomat raw images that the floppy emulator uses and the fz can read from the emulator

down side is any images i upload the person downloading requires the same hxc floppy emulator to read them
  ----- Original Message ----- 
  From: k9k9dog 
  To: CZsynth@yahoogroups.com 
  Sent: Tuesday, May 07, 2013 10:29 AM
  Subject: [CZsynth] Re: CZ3000 suddenly died...


    
  ah :) you could torment Garth at Chicken Systems with a 
  request for sample format conversion, just for the hell of it.
  (kiddin')

  how do you find the floppy emulator? i was thinking of using one 
  for my atari. even wonder if viable for some other more common 
  samplers. i see some at high prices, then others around the 40eu 
  mark in Asia. same thing?

  ('88 Amnesiac here)

  --- In CZsynth@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
  >
  > they will be in raw imd image format for the hxc floppy emulator if you have the emulator i will be uploading to the files section once i have finished imaging them
  > 
  > as i have no floppy any more i cant load them and dump them from the fz1
  > 
  > ----- Original Message ----- 
  > From: Dom 
  > To: CZsynth@yahoogroups.com 
  > Sent: Monday, May 06, 2013 8:12 PM
  > Subject: Re: [CZsynth] Re: CZ3000 suddenly died...
  > 
  > 
  > 
  > well known song: 'it's your power su-pply' jammie is right, only logical explanation. 
  > 
  > jammie can we have some links to some rave-ups? :) (and your collection of hardcore kick drums)
  > 
  > ________________________________
  > From: burnermarko <burnermarko@...>
  > To: CZsynth@yahoogroups.com 
  > Sent: Monday, May 6, 2013 2:42 AM
  > Subject: [CZsynth] Re: CZ3000 suddenly died...
  > 
  > 
  > 
  > Hi, I do have the same problem. Did you
  > have any success by exchanging the relay?
  > 
  > --- In CZsynth@yahoogroups.com, "ROGER" <r.d.j.w@> wrote:
  > >
  > > Thanks, I'll have go.
  > > 
  > > --- In CZsynth@yahoogroups.com, "jammie" <jammie.emma@> wrote:
  > > >
  > > > relay is shot just exchange for a new one or bypass its only there to stop the sudden rush of sound which can cuase a thud its there for speaker protection but if you turn down the 
  > > > volume fader on mixer you can switch it on with no problem
  > > > 
  > > > its a common fualt and its the same for other synth yamaha used the same type circuits the sy22/33/35/55 have the same and suffer the same problem the relays burn out and stop latching
  > > > ----- Original Message ----- 
  > > > From: ROGER 
  > > > To: CZsynth@yahoogroups.com 
  > > > Sent: Monday, March 12, 2012 9:50 PM
  > > > Subject: [CZsynth] CZ3000 suddenly died...
  > > > 
  > > > 
  > > > 
  > > > Apologies if question has been answered before, but old posts are hard to sieve through!
  > > > 
  > > > My CZ3000 died when left on for a few hours, the display etc. still works, you can switch parameters etc. but no sound... I left it off for 24 hours then tried again, still no sound. Tried Headphones, no sound that way either. Any ideas?
  > > > 
  > > > 
  > > > 
  > > > 
  > > > 
  > > > [Non-text portions of this message have been removed]
  > > >
  > >
  > 
  > [Non-text portions of this message have been removed]
  > 
  > 
  > 
  > 
  > 
  > [Non-text portions of this message have been removed]
  >



  

[Non-text portions of this message have been removed]