Casio CZ/ VZ/ FZ - Pro Series

what about the diodes caps and resistors ,, any look old or depleted?
chaz


----- Original Message ----- 
From: "burnermarko" <burnermarko@...>
To: <CZsynth@yahoogroups.com>
Sent: Sunday, May 05, 2013 8:42 PM
Subject: [CZsynth] Re: CZ3000 suddenly died...


> Hi, I do have the same problem. Did you
> have any success by exchanging the relay?
>
> --- In CZsynth@yahoogroups.com, "ROGER" <r.d.j.w@...> wrote:
>>
>> Thanks, I'll have  go.
>>
>> --- In CZsynth@yahoogroups.com, "jammie" <jammie.emma@> wrote:
>> >
>> > relay is shot just exchange for a new one or bypass its only there to 
>> > stop the sudden rush of sound which can cuase a thud its there for 
>> > speaker protection but if you turn down the
>> > volume fader on mixer you can switch it on with no problem
>> >
>> > its a common fualt and its the same for other synth yamaha used the 
>> > same type circuits the sy22/33/35/55 have the same and suffer the same 
>> > problem the relays burn out and stop latching
>> >   ----- Original Message ----- 
>> >   From: ROGER
>> >   To: CZsynth@yahoogroups.com
>> >   Sent: Monday, March 12, 2012 9:50 PM
>> >   Subject: [CZsynth] CZ3000 suddenly died...
>> >
>> >
>> >
>> >   Apologies if question has been answered before, but old posts are 
>> > hard to sieve through!
>> >
>> >   My CZ3000 died when left on for a few hours, the display etc. still 
>> > works, you can switch parameters etc. but no sound... I left it off for 
>> > 24 hours then tried again, still no sound. Tried Headphones, no sound 
>> > that way either. Any ideas?
>> >
>> >
>> >
>> >
>> >
>> > [Non-text portions of this message have been removed]
>> >
>>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>