Casio CZ/ VZ/ FZ - Pro Series

"the Fusion doesn't have sysex implementation that would allow it to work with commands for a remote MIDI editor."

But is the Fusion capable of doing bulk data dumps one patch at a time or even as a bank of patches? If so, you can create an editor that assembles the patch (or bank of patches) and then sends it to the Fusion.

If the Fusion has absolutely no sysex implementation at all, then you would be right. As for using ctrlr, I do not do lua programming so I cannot comment on whether or not you can assemble a preset byte at a time and then transmit it. From what little I have read, I am inclined tho think you can since I believe you can label and reference each item within a sysex dump. Again, my knowledge of ctrlr is very limited. Ask atom. 

Steve



--- In CZsynth@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> http://promusicproducts.com/forum/phpBB2/viewtopic.php?f=2&t=1311
> 
> here is a debate on it 
>   ----- Original Message ----- 
>   From: jammie 
>   To: CZsynth@yahoogroups.com 
>   Sent: Saturday, August 31, 2013 4:15 PM
>   Subject: Re: [CZsynth] RE: Sysex and USB MIDI
> 
> 
>     
>   really daniel forro who always thinks he is right and likes to corect everybody to his perspective 
> 
>   do you own an s2 or a fusion if you did you would know
> 
>   i create ctrlr and sounddiver adaptions
> 
>   and you cant make sysex editors for these synths
> 
>   if you read the manuals you would see that they can record and send sysex from there sequencer but that is for other synths
> 
>   the fusion cant read sysex for it engine as we tried to make panels and editors for them and even contacted alesis direct for the sysex manual and was told there is not one
> 
>   as some one tried to make a dx7 syx conversion to fusion fm and its impossible the same as people wanted to use the micron sysex and convert to the fusion va and it cant be done as told by alesis them selfs in there q and a section
> 
>   so before saying they do find out first 
> 
>   ax80 does not do sysex and there are many others 
> 
>   just because you cant think of any does not mean that they dont exist 
>   ----- Original Message ----- 
>   From: Daniel Forró 
>   To: CZsynth@yahoogroups.com 
>   Sent: Saturday, August 31, 2013 11:47 AM
>   Subject: Re: [CZsynth] RE: Sysex and USB MIDI
> 
>   On 31 Aug, 2013, at 6:14 PM, jammie wrote:
> 
>   > some synths never implemented sysex
> 
>   Really? Right now I can't remember even simple one without this 
>   ability...
> 
>   > gem s2/s3 never had sysex so front panel editing only the alesis 
>   > fusion no sysex
> 
>   Manual says there is SysEx control and shows lot of SysEx commands...
>   >
>   >
>   > but for blanket preset dumps in find that change it is the quickest 
>   > utility
>   >
>   > it has a few synths added with editors
>   >
>   > but also has a generic conection you add your midi id channel and 
>   > interface that your cz is attached and add the delay you want and 
>   > then just open a sysex file and send
>   >
>   > http://www.mossgrabers.de/Software/ChangeIt/ChangeIt.html
>   >
>   > this is were the program is
> 
>   Only Windows....
> 
>   Daniel Forro
> 
>   No virus found in this message.
>   Checked by AVG - www.avg.com
>   Version: 2013.0.3392 / Virus Database: 3222/6625 - Release Date: 08/30/13
> 
>   [Non-text portions of this message have been removed]
> 
> 
> 
>   
>   No virus found in this message.
>   Checked by AVG - www.avg.com
>   Version: 2013.0.3392 / Virus Database: 3222/6625 - Release Date: 08/30/13
> 
> 
> [Non-text portions of this message have been removed]
>