Casio CZ/ VZ/ FZ - Pro Series

Dang..that's a GOOD tip! Thanks Terry!!

Jon

	-----Original Message-----
	From:	orbitaldecay_99 [SMTP:orbitaldecay@...]
	Sent:	Tuesday, June 04, 2002 12:47 AM
	To:	CZsynth@yahoogroups.com
	Subject:	[CZsynth] Re: Velocity and aftertouch on the CZ-1

	There is an adjustment you can make for the sensitivity 
	of the CZ-1 aftertouch sensor. VR4 on the main board #MA1M, 
	located on the upper right of the board. Fully counter
	clockwise for maximum sensitivity, and clockwise for 
	less sensitivity. Unless the sensor strip under the 
	keyboard is shot, this should dial in the amount of 
	aftertouch pressure you prefer.
	
	Terry (The Casio Kid)
	
	
	To unsubscribe from this group, send an email to:
	CZsynth-unsubscribe@yahoogroups.com
	
	
	
	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .