Casio CZ/ VZ/ FZ - Pro Series

I know this might not be relevant but here is one weird thing I had with 
my CZ-1000 when i bought it..


when I would do a pitch bend.. when it the very highest and lowest 
values..  it would spike up super high or super low.. i just assumed it 
was some quirky problem with the bender wheel..


but then i went into the paramters of the synth and noticed something.. 
the parameter was actually set to 99 somehow.. not +12.. or something 
like that.. so when i set the value to a correct value.. the pitch wheel 
worked great..


I don't know how it got to that setting in the first place.. but it was 
there..  the kind of weirdness you're talking about almost sounds like 
parameters that somehow got skewed.. so many somehow doing a sysex dump 
from existing good patches..  or even just going into the various 
parameters and just adjusting them could restore normal behavior.




Good luck,
Caleb






Daniel Forr� danforcz@... [CZsynth] wrote:
>
> Have you followed all advice written about this in last days?
>
> Daniel Forro
>
> On Jul 16, 2016, at 6:07 AM, roberflas@... [CZsynth] wrote:
>
> > Hi all, i just change the battery with a new one and The keyboard
> > are wrong, one notes sound ok but the scale is wrong and another
> > keys sound too hight in tone and sustained until poder off, in the
> > middle of keyboard all notes are sustained and too hight the key
> > velocity touch is ok for all keys.
> > Any idea about what happen.
> > Thank you
> >
> > ------------------------------------
> > Posted by: roberflas@...
> > ------------------------------------
>
>