Last one is true :-)
They say PB and MW are common to both parts.
Ooops.
BUT... Read the page 49!
There's written that Bend Range can be set independently for each part when Key Split setting is written in the memory (as Operation Data).
Then it would be enough to set for the Lower part Bend Range = 0, and that sound will not react to PB even when PB data goes to both Upper and Lower parts.
Try to experiment with it.
Daniel Forro
On Sep 26, 2016, at 4:18 PM, Daniel Forró danforcz@... [CZsynth] wrote:
On page 45 of Owner's Manual is written it is possible to set independent setting. So if you can't do it, there are these possibilities:- manual is wrong- you do something wrong- your instrument is wrong- I'm totally wrong.Just follow the manual and set it as you need.Daniel ForroHey all. I thought I had read and understood all the parameters of the CZ1, but after purchasing a CZ1 I've discovered that I cannot assign pitch bend to just the RH when in Key Split. Is there any workaround or trick anyone might know of for having the pitch bend only effect the RH? I was hoping to trigger pads and drones with the LH, hold them with the pedal, and then play leads with the RH using the pitch bend with LH.Perhaps the solution is to not speed read manuals before buying synths.