Dave Smith Instruments SYNTHESIZERS

Looks like I gave you some incomplete information (again). Under "Midi
Clock" settings there is an external input mode. THAT is where you can
make the sequencer step when the left external input crosses a fixed
threshold.

That other business I was talking about just lets the sequencer run
when the ext in is over the threshold. 

So much to learn about these things.....



--- In DSI_Evolver@yahoogroups.com, "matthew goike"
<goodnessgrows@...> wrote:
>
> Thanks very much.  Now if I could just set MIDI clock from the
> sequencer steps and send it out...
> 
> 
> --- In DSI_Evolver@...m, "devetron" <devetron@> wrote:
> >
> > Oops. "EiS" is the one to gate the sequencer. I'm a little jealous of
> > you MEK/PEK owners with your fancy displays and all.
> > 
> > --- In DSI_Evolver@yahoogroups.com, "devetron" <devetron@> wrote:
> > >
> > > Use the "trigger select"  setting for your patch. "Ei" is the proper
> > > setting on the dEvo. 
> > > 
> > > --- In DSI_Evolver@yahoogroups.com, "matthew goike"
> > > <goodnessgrows@> wrote:
> > > >
> > > > I'd like to use a squarewave pulse coming through the audio
input to
> > > run my sequencer clock 
> > > > on my PEK.  According to the manual, I can use external input peak
> > > as a modulation source, 
> > > > and sequencer clock as a destination, but seq clock doesn't
show up
> > > in the destination menu 
> > > > in the modulators section.  Is there somewhere else to set
this at,
> > > or do I need to change any 
> > > > global parameters to enable this?   Any help would be appreciated.
> > > >
> > >
> >
>