Dave Smith Instruments SYNTHESIZERS

Bah. So I went to my evolver to try out the settings under "midi 
clock" and the external in settings weren't there. I emailed DSI and 
they told me that the settings were moved to "trigger sel" with the 
3.0 OS: "That moved in version 3 to the 'Trigger Sel' parameter, 
mostly to bring it in line with the other Evolver models, but also 
because it's not really a clock parameter." 
I originally got that info from the version 2.0 manual. 

I'll try to shut up now unless I KNOW what I'm talking about. 
Me: "Hey everybody! I'm typing on the internet!!!"


--- In DSI_Evolver@yahoogroups.com, "devetron" <devetron@...> wrote:
>
> Looks like I gave you some incomplete information (again). 
Under "Midi
> Clock" settings there is an external input mode. THAT is where you 
can
> make the sequencer step when the left external input crosses a fixed
> threshold.
> 
> That other business I was talking about just lets the sequencer run
> when the ext in is over the threshold. 
> 
> So much to learn about these things.....
> 
> 
> 
> --- In DSI_Evolver@yahoogroups.com, "matthew goike"
> <goodnessgrows@> wrote:
> >
> > Thanks very much.  Now if I could just set MIDI clock from the
> > sequencer steps and send it out...
> > 
> > 
> > --- In DSI_Evolver@yahoogroups.com, "devetron" <devetron@> wrote:
> > >
> > > Oops. "EiS" is the one to gate the sequencer. I'm a little 
jealous of
> > > you MEK/PEK owners with your fancy displays and all.
> > > 
> > > --- In DSI_Evolver@yahoogroups.com, "devetron" <devetron@> 
wrote:
> > > >
> > > > Use the "trigger select"  setting for your patch. "Ei" is the 
proper
> > > > setting on the dEvo. 
> > > > 
> > > > --- In DSI_Evolver@yahoogroups.com, "matthew goike"
> > > > <goodnessgrows@> wrote:
> > > > >
> > > > > I'd like to use a squarewave pulse coming through the audio
> input to
> > > > run my sequencer clock 
> > > > > on my PEK.  According to the manual, I can use external 
input peak
> > > > as a modulation source, 
> > > > > and sequencer clock as a destination, but seq clock doesn't
> show up
> > > > in the destination menu 
> > > > > in the modulators section.  Is there somewhere else to set
> this at,
> > > > or do I need to change any 
> > > > > global parameters to enable this?   Any help would be 
appreciated.
> > > > >
> > > >
> > >
> >
>