Dave Smith Instruments SYNTHESIZERS

I'd like to use a squarewave pulse coming through the audio input to run my sequencer clock 
on my PEK.  According to the manual, I can use external input peak as a modulation source, 
and sequencer clock as a destination, but seq clock doesn't show up in the destination menu 
in the modulators section.  Is there somewhere else to set this at, or do I need to change any 
global parameters to enable this?   Any help would be appreciated.

Use the "trigger select"  setting for your patch. "Ei" is the proper
setting on the dEvo. 

--- In DSI_Evolver@yahoogroups.com, "matthew goike"
<goodnessgrows@...> wrote:
>
> I'd like to use a squarewave pulse coming through the audio input to
run my sequencer clock 
> on my PEK.  According to the manual, I can use external input peak
as a modulation source, 
> and sequencer clock as a destination, but seq clock doesn't show up
in the destination menu 
> in the modulators section.  Is there somewhere else to set this at,
or do I need to change any 
> global parameters to enable this?   Any help would be appreciated.
>

Oops. "EiS" is the one to gate the sequencer. I'm a little jealous of
you MEK/PEK owners with your fancy displays and all.

--- In DSI_Evolver@yahoogroups.com, "devetron" <devetron@...> wrote:

>
> Use the "trigger select"  setting for your patch. "Ei" is the proper
> setting on the dEvo. 
> 
> --- In DSI_Evolver@yahoogroups.com, "matthew goike"
> <goodnessgrows@> wrote:
> >
> > I'd like to use a squarewave pulse coming through the audio input to
> run my sequencer clock 
> > on my PEK.  According to the manual, I can use external input peak
> as a modulation source, 
> > and sequencer clock as a destination, but seq clock doesn't show up
> in the destination menu 
> > in the modulators section.  Is there somewhere else to set this at,
> or do I need to change any 
> > global parameters to enable this?   Any help would be appreciated.
> >
>

Thanks very much.  Now if I could just set MIDI clock from the
sequencer steps and send it out...


--- In DSI_Evolver@yahoogroups.com, "devetron" <devetron@...> wrote:

>
> Oops. "EiS" is the one to gate the sequencer. I'm a little jealous of
> you MEK/PEK owners with your fancy displays and all.
> 
> --- In DSI_Evolver@yahoogroups.com, "devetron" <devetron@> wrote:
> >
> > Use the "trigger select"  setting for your patch. "Ei" is the proper
> > setting on the dEvo. 
> > 
> > --- In DSI_Evolver@yahoogroups.com, "matthew goike"
> > <goodnessgrows@> wrote:
> > >
> > > I'd like to use a squarewave pulse coming through the audio input to
> > run my sequencer clock 
> > > on my PEK.  According to the manual, I can use external input peak
> > as a modulation source, 
> > > and sequencer clock as a destination, but seq clock doesn't show up
> > in the destination menu 
> > > in the modulators section.  Is there somewhere else to set this at,
> > or do I need to change any 
> > > global parameters to enable this?   Any help would be appreciated.
> > >
> >
>

Looks like I gave you some incomplete information (again). Under "Midi
Clock" settings there is an external input mode. THAT is where you can
make the sequencer step when the left external input crosses a fixed
threshold.

That other business I was talking about just lets the sequencer run
when the ext in is over the threshold. 

So much to learn about these things.....



--- In DSI_Evolver@yahoogroups.com, "matthew goike"
<goodnessgrows@...> wrote:
>
> Thanks very much.  Now if I could just set MIDI clock from the
> sequencer steps and send it out...
> 
> 
> --- In DSI_Evolver@...m, "devetron" <devetron@> wrote:
> >
> > Oops. "EiS" is the one to gate the sequencer. I'm a little jealous of
> > you MEK/PEK owners with your fancy displays and all.
> > 
> > --- In DSI_Evolver@yahoogroups.com, "devetron" <devetron@> wrote:
> > >
> > > Use the "trigger select"  setting for your patch. "Ei" is the proper
> > > setting on the dEvo. 
> > > 
> > > --- In DSI_Evolver@yahoogroups.com, "matthew goike"
> > > <goodnessgrows@> wrote:
> > > >
> > > > I'd like to use a squarewave pulse coming through the audio
input to
> > > run my sequencer clock 
> > > > on my PEK.  According to the manual, I can use external input peak
> > > as a modulation source, 
> > > > and sequencer clock as a destination, but seq clock doesn't
show up
> > > in the destination menu 
> > > > in the modulators section.  Is there somewhere else to set
this at,

> > > or do I need to change any 
> > > > global parameters to enable this?   Any help would be appreciated.
> > > >
> > >
> >
>

Bah. So I went to my evolver to try out the settings under "midi 
clock" and the external in settings weren't there. I emailed DSI and 
they told me that the settings were moved to "trigger sel" with the 
3.0 OS: "That moved in version 3 to the 'Trigger Sel' parameter, 
mostly to bring it in line with the other Evolver models, but also 
because it's not really a clock parameter." 
I originally got that info from the version 2.0 manual. 

I'll try to shut up now unless I KNOW what I'm talking about. 
Me: "Hey everybody! I'm typing on the internet!!!"


--- In DSI_Evolver@yahoogroups.com, "devetron" <devetron@...> wrote:
>
> Looks like I gave you some incomplete information (again). 
Under "Midi
> Clock" settings there is an external input mode. THAT is where you 
can
> make the sequencer step when the left external input crosses a fixed
> threshold.
> 
> That other business I was talking about just lets the sequencer run
> when the ext in is over the threshold. 
> 
> So much to learn about these things.....
> 
> 
> 
> --- In DSI_Evolver@yahoogroups.com, "matthew goike"
> <goodnessgrows@> wrote:
> >
> > Thanks very much.  Now if I could just set MIDI clock from the
> > sequencer steps and send it out...
> > 
> > 
> > --- In DSI_Evolver@yahoogroups.com, "devetron" <devetron@> wrote:
> > >
> > > Oops. "EiS" is the one to gate the sequencer. I'm a little 
jealous of
> > > you MEK/PEK owners with your fancy displays and all.
> > > 
> > > --- In DSI_Evolver@yahoogroups.com, "devetron" <devetron@> 
wrote:
> > > >
> > > > Use the "trigger select"  setting for your patch. "Ei" is the 
proper
> > > > setting on the dEvo. 
> > > > 
> > > > --- In DSI_Evolver@yahoogroups.com, "matthew goike"
> > > > <goodnessgrows@> wrote:
> > > > >
> > > > > I'd like to use a squarewave pulse coming through the audio
> input to
> > > > run my sequencer clock 
> > > > > on my PEK.  According to the manual, I can use external 
input peak
> > > > as a modulation source, 
> > > > > and sequencer clock as a destination, but seq clock doesn't
> show up
> > > > in the destination menu 
> > > > > in the modulators section.  Is there somewhere else to set
> this at,
> > > > or do I need to change any 
> > > > > global parameters to enable this?   Any help would be 
appreciated.

> > > > >
> > > >
> > >
> >
>