Synth-DIY Yahoo! Groups Archives

Re: [Evolver] stereo patch

2005-09-13 by Stefan Trippler

Setting the modulation amount to maximum in the mod slot will have the 
desired effect.

Regards
Stefan

----- Original Message -----

Show quoted textHide quoted text

From: "matsag21" <mathieu@...>
To: <DSI_Evolver@yahoogroups.com>
Sent: Tuesday, September 13, 2005 3:20 PM
Subject: [Evolver] stereo patch


> Hi guys,
>
> i was wondering what is the best way to make a true stereo patch using
> the internal sequencers.
>
> so osc1 is Left, osc 2 is right (both set at the lower pitch G-2 or
> something).
>
> solution 1: i set seq 2 to control osc1 pitch, but then when i linked
> seq2 to oscc 2 freq also (using one of the 4 modulation slots), i did
> not manage to set it to the same pitch (although i fiddled with the
> amount settings with ne success).
>
> solution 2: Then I had to copy seq2 in seq3 and use seq3 to control
> osc3freq and then both osc (L and R) end played at the same pitch.
> (but needs to use 2 sequencers).
>
> Is solution 2 the only solution ?  or does it looks like that i am
> doing something wrong in solution 1 ?
>
> thanks for your time.
>
> mat.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Re: [Evolver] stereo patch

2005-09-14 by matsag21

Thank you Stephan,

but in fact it seems that the pitch becomes different if using higher
values in the step seq. (when i use lower values it is ok).

But then i realized there is the "all oscillator frequency" mod. dest.
which does much what i wanted. (oups i should have thought of that one...)

cheers

mat.


--- In DSI_Evolver@yahoogroups.com, "Stefan Trippler" <doct@o...> wrote:

Show quoted textHide quoted text

> Setting the modulation amount to maximum in the mod slot will have the 
> desired effect.
> 
> Regards
> Stefan
> 
> ----- Original Message ----- 
> From: "matsag21" <mathieu@t...>
> To: <DSI_Evolver@yahoogroups.com>
> Sent: Tuesday, September 13, 2005 3:20 PM
> Subject: [Evolver] stereo patch
> 
> 
> > Hi guys,
> >
> > i was wondering what is the best way to make a true stereo patch using
> > the internal sequencers.
> >
> > so osc1 is Left, osc 2 is right (both set at the lower pitch G-2 or
> > something).
> >
> > solution 1: i set seq 2 to control osc1 pitch, but then when i linked
> > seq2 to oscc 2 freq also (using one of the 4 modulation slots), i did
> > not manage to set it to the same pitch (although i fiddled with the
> > amount settings with ne success).
> >
> > solution 2: Then I had to copy seq2 in seq3 and use seq3 to control
> > osc3freq and then both osc (L and R) end played at the same pitch.
> > (but needs to use 2 sequencers).
> >
> > Is solution 2 the only solution ?  or does it looks like that i am
> > doing something wrong in solution 1 ?
> >
> > thanks for your time.
> >
> > mat.
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >

Dave Smith Instruments SYNTHESIZERS

Re: [Evolver] stereo patch

Re: [Evolver] stereo patch

Re: [Evolver] stereo patch

Move to quarantaine