Dave Smith Instruments SYNTHESIZERS

Hi Again,

Just got a reply from Dave, they are sending me a replacement display.

Cheers

Andy

 

________________________________

From: DSI_Evolver@yahoogroups.com [mailto:DSI_Evolver@yahoogroups.com]
On Behalf Of Andrew Capon
Sent: 17 July 2006 16:27
To: DSI_Evolver@yahoogroups.com
Subject: [Evolver] Back light problems

 

Hi Guys,

 

The back light on my PEK has just failed. Has anyone else seen this?

It then came back for a bit but just on the left side and now it has
gone again. I seem to remember it being lit from both the left and right
side before but I am not sure.

Is it something I can have a look at by opening up the case or will this
void my warranty?

Cheers

Andy

This happened to my PEK within a month after receiving it. The 
display is on a large circuit board. You'll have to remove all the 
knobs and top screws, lift the top, unplug all the circuit boards 
and make the switch. Don't forget to return the defective board to 
Dave :)

Bernie
 
 --- In DSI_Evolver@yahoogroups.com, "Andrew Capon" <acapon@...> 
wrote:
>
> Hi Again,
> 
> Just got a reply from Dave, they are sending me a replacement 
display.
> 
> Cheers
> 
> Andy
> 
>  
> 
> ________________________________
> 
> From: DSI_Evolver@yahoogroups.com 
[mailto:DSI_Evolver@yahoogroups.com]
> On Behalf Of Andrew Capon
> Sent: 17 July 2006 16:27
> To: DSI_Evolver@yahoogroups.com
> Subject: [Evolver] Back light problems
> 
>  
> 
> Hi Guys,
> 
>  
> 
> The back light on my PEK has just failed. Has anyone else seen 
this?
> 
> It then came back for a bit but just on the left side and now it 
has
> gone again. I seem to remember it being lit from both the left and 
right
> side before but I am not sure.
> 
> Is it something I can have a look at by opening up the case or 
will this

> void my warranty?
> 
> Cheers
> 
> Andy
>