Yamaha DTXpress/DTXplorer/DTXtreme

Since it does an auto detect only at startup, you need to make sure the unit is turned off, then plug everything in and then turn it back on. If you do this one pad at a time, just remember to turn off the unit before you plug anything new into it.
 
OGD

________________________________

From: Tim Scarborough []
Sent: Fri 2/25/2005 6:27 PM
To: DTXpress@yahoogroups.com
Subject: [DTXpress] Re: Unresponsive Tom1 input




We're making progress! I hadn't switched off, so I did that, 
unplugged, plugged one in to tom1 and hallelujah it worked! However, 
it disappeared again when I plugged everything else in.

So I unplugged, switched off and on again, and again tom1 was fine. I 
plugged everything in one at a time, checking tom1 after each 
connection. It was fine until I plugged the snare in (the socket next 
to it), when it stopped working again. The only one I hadn't plugged 
in at this point was tom2.

Does this confirm the suspicion about a bad connection at the socket?
Thanks for sticking with me!
Tim

--- In DTXpress@...m, "Damon, Rob" <rdamon@m...> wrote:
> The factory reset should have cleared out anything that was
> reprogrammed. 
>  
> I believe this module had an auto-detect of pad types. After you 
did a
> factory reset, did you turn the unit off?
>  
> Try unplugging all the pads. Turn the unit on. Do a factory reset. 
Turn
> the unit off. Now just plug in one pad to the tom1 input that you 
know
> for sure works. Turn the unit on. What happens then.
>  
> If it still doesn't work, you could open up the module and see if 
the
> jack inside the module is loose or has a broken connection. Also, 
email
> the person you bought it from and ask if they had any problems with 
that
> input. 
>  
> OGD
> 
> ________________________________
> 
> From: Tim Scarborough  
> Sent: Friday, February 25, 2005 3:30 PM
> To: DTXpress@yahoogroups.com
> Subject: [DTXpress] Re: Unresponsive Tom1 input
> 
> 
> 
> Thanks for the suggestions!
> All followed and no change.
> Any other thoughts?
> Tim
> 
> 
> --- In DTXpress@yahoogroups.com,  <rdamon@m...> wrote:
> > Welcome aboard.
> >  
> > First try a factory reset.
> > Second, try a different cable from one a tom that does work.
> > Third, try a different tom pad that does work on one of the other
> > inputs.
> > Fourth, move the tom pad that doesn't work to another input.
> >  
> >  
> > Let us know if any of these help.
> >  
> > OGD
> > 
> > ________________________________
> > 
> > From: Tim Scarborough 
> > Sent: Friday, February 25, 2005 9:39 AM
> > To: DTXpress@yahoogroups.com
> > Subject: [DTXpress] Unresponsive Tom1 input
> > 
> > 
> > 
> > Just aquired my first electronic kit  - a DTX v1 - through ebay. 
> I've 
> > been surprised by how easy it is to get to grips with all the 
> > different variables in the module but I have a worry: the Tom1 
> input 
> > produces no sounds at all. And it doesn't react when I hit the 
pad 
> in 
> > Voice Edit mode. Can anyone suggest any checks I can make?
> > Thanks!
> > Tim
> 
> 
> 
______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security 
System.
> For more information please visit http://www.messagelabs.com/email 
> 
______________________________________________________________________








Community email addresses:
  Post message: DTXpress@yahoogroups.com
  Subscribe:    DTXpress-subscribe@yahoogroups.com
  Unsubscribe:  DTXpress-unsubscribe@yahoogroups.com
  List owner:   DTXpress-owner@yahoogroups.com

Shortcut URL to this page:
  http://groups.yahoo.com/group/DTXpress

Alternate DTXpress site:
  http://www.dtxpressions.com 



Yahoo! Groups Sponsor	
ADVERTISEMENT
click here <http://us.ard.yahoo.com/SIG=1291m81ej/M=298184.6018725.7038619.3001176/D=grplch/S=1705031972:HM/EXP=1109460859/A=2593423/R=0/SIG=11el9gslf/*http://www.netflix.com/Default?mqso=60190075> 	
	

________________________________

Yahoo! Groups Links


*	To visit your group on the web, go to:
	http://groups.yahoo.com/group/DTXpress/
	  
*	To unsubscribe from this group, send an email to:
	DTXpress-unsubscribe@yahoogroups.com <mailto:DTXpress-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
	  
*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . 



______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________