Yamaha DTXpress/DTXplorer/DTXtreme

The physical sound made by the stick hit the rubber surface on the
RHH130 is quite loud. Go to www.dtxperience.com and search for RHH-130
silencing or Dishtowel, I think. One of the members opened the pad up
and put his wife's dishtowel inside and it makes considerably less sound
now. ( I am serious, not joking on this.)

 

Also, I think you had to set the trigger settings to "SP Dyna" (or SP
med) when using the RHH130/PCY150 pads with the Dtxpress III module. It
was offered as a standard and a special version. 

 

OGD

 

From: DTXpress@yahoogroups.com [mailto:DTXpress@yahoogroups.com] On
Behalf Of BHBA
Sent: Wednesday, January 09, 2008 12:21 PM
To: DTXpress@yahoogroups.com
Subject: [DTXpress] RHH 130 Hi-Hat

 

Could not see this post addressed. I have the DtxtremeIII with RHH 130 
Hi Hat. Everything is set up per manual, only issue is with the RHH 
130Hi-Hat. Not sure if its a problem or just how it performs, but the 
stick noise is far louder than any typical volume setting for a hi-hat.
Is there something I am missing or is this just the way it is.
Another ? pertaining to the ride symbal. Although it is set up 
correctly and I am connected with a stero cable, the cup, cybal, and 
edge are not recognized. If in any setup mode, I strike the cup, pad, 
or edge and nothing changes.??
'

 
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________


______________________________________________________________________
The information transmitted herewith is sensitive information intended
only for use to the individual or entity to which it is addressed. If
the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________