Yamaha DTXpress/DTXplorer/DTXtreme

The problem might be that the splitter is sending the same signal 
along both sides of the "Y."  First, make sure that you're using a 
TRS splitter--that is, one that divides a stereo signal separately 
into tip and ring feeds inot the 9/10 input. Some stereo splitters 
sends a uniform signal along both branches. If it ain't that, the 
splitter may be defective.


--- In DTXpress@yahoogroups.com, "pinachee <stepar@a...>" 
<stepar@a...> wrote:
> I too am having a problem getting two trigger sounds out of my 9/10
> port.  I have read many posts below and am still having a 
problem.  I
> have a DTXpress kit.  I changed the MIDI note under the voice 
module,
> so 10 is different than 9.  I am using a stereo splitter.  I 
changed
> my "reject" and "spclreject" from 3 to 4.  I've changed the voice 
on
> 10 to be a tom.  Nothing I have tried has worked.  I still get the
> same sound out of my 10 trigger (additional tom) as I'm getting 
out of
> my 9 trigger (cymbol).  They both are making a cymbol sound.  I'm
> feeling helpless.  I'd appreciate any help or advise.