Yamaha DTXpress/DTXplorer/DTXtreme

Are you by any chance hitting the pad on input 10 instead of input 
9? Or is there conceivably enough crosstalk when you hit 9 that 
another pad's note number is going through? Check to see whether one 
of kit 80's other inputs (a tom?) carries note number 113. If so, 
see if you can figure out how it's taking over.

--- In DTXpress@yahoogroups.com, jadeiebooshkie <jadiebooshkie@y...> 
wrote:
> 
> 
> Here's what I did...I re read your last post...I went
> into the UTILITY Menu and FOUND one mistake I made:
> I now have these:
> UT MAP N=106A#6 (this was listed as no assign)
> =C/024 Ride Em  (This is for pad 9)
> 
> Under VOICE MENU
> KIT*In=pad9
> Copy To In=pad9
> USER KIT 80 pad 9 showed the note 106A#6 with C/024
> Ride Em
> I unplugged the KITI and replugged it in Visulite is
> in input 1 on KITI, input 1 is lit the red lights on
> the KITI registered 0-0-1.  I tapped the Visulite then
> pressed Auto Train on the KITI the 0-0-1 still
> flashed, then I hit pad 9 (that's plugged into DTX
> channel 9/10)...all the red lights lit up to MIDI NOTE
> then the 1-1-3 started to flash, as it did before, not
> 106 as it should be.  When I listen to the visulite in
> my headphones, the sound it is picking up is a tom
> sound...SOMETHING is not right, and I don't know if
> I'M doing something wrong, or if there's something not
> set with the DTX or if it's the KITI...I hit pad 9 and
> get a cymbal from kit 80, I hit the visulite, and I
> get a tom...can you think of anything that may be the
> problem...could the 9/10 split input on the DTX be
> confusing the KITI?
> Thanks for your help and patience with me,
> Jade
> --- "liberatusvirus <liberatusvirus@y...>"
> <liberatusvirus@y...> wrote:
> > We're getting there. 
> > 
> > > PS...one more thing....I unplugged the ride from
> > the
> > > KITI and plugged it into input 2 on KITI...I am
> > still
> > > getting the tom sound...that WASN'T a high pitched
> > > noise I heard...it was a tom voice.  So my pad 9
> > that
> > > was my 3rd tom is now on my RIDE...I can't change
> > the
> > > note number on the KITI...it keeps flashing 1-1-3
> > > instead of 0-2-4 or 0-2-6....It's gotta be
> > something I
> > > am doing wrong with the DTX.
> > 
> > It doesn't matter which input on the kiti you're
> > using; the midi 
> > note number gets transferred to the kiti's active
> > input, which you 
> > select either by hitting the pad connected to it or
> > scrolling 
> > through the inputs (the green lights) manually on
> > the kiti keyboard.
> >  
> > > UT MAP N=65F...C/026 Rider3
> > 
> > This is the only setting that matters for getting
> > the midi note 
> > information from the DTX to the kiti. Midi note
> > number 65 also has 
> > to show up as the note number for pad 9 when you
> > check in the voice 
> > menu of kit 80. If so, save kit 80 with the button
> > on the front of 
> > the module. If not, don't do anything else until you
> > make these 
> > numbers match; if 65 turns out not to work, try
> > other numbers. Save 
> > kit 80 when you've arrived at a viable note number
> > for C/026 on 
> > input 9, just to make sure that you don't change
> > anything by 
> > mistake. (Acoustic kit 1 is irrelevant to what we're
> > doing. If you 
> > set up the note number for the ride on the kiti
> > correctly, you'll 
> > get the same ride sound for the visulite, no matter
> > what kit on the 
> > DTX you happen to be using).
> >  
> > To keep it simple on the kiti, disconnect everything
> > but the 
> > visulite bow. Hit the visulite to select its input.
> > Now, 
> > press "AUTO" to make "midi note number" the active
> > parameter; three 
> > red lights corresponding to a midi note number
> > (probably not yours) 
> > should be blinking consecutively, with a pause
> > between each complete 
> > cycle. Making sure that your foot is not on either
> > the hi hat 
> > controller or the kick pedal, hit pad 9, C/026, in
> > kit 80; don't 
> > accidentally hit any other pad afterward. After
> > recognizing the 
> > default channel 10, the kiti red lights should start
> > to register 0-6-
> > 5, or whatever your final midi note number turned
> > out to be in the 
> > DTX utility menu. If the correct number flashes, you
> > can continue 
> > to "Gain Auto Train" on p. 34 to adjust the
> > triggers. If it doesn't, 
> > it's back to the DTX to figure out why. 
> > 
> > 
> > > 
> > > 
> > > --- jadeiebooshkie <jadiebooshkie@y...> wrote:
> > > > 
> > > > 
> > > > Here's what I have done... I changed my user kit
> > > > number to 80-went into voice and copied the ride
> > > > setting to pad 9...when I hit pad 9 it sounds
> > like a
> > > > ride...the Visulite is plugged into KITI input
> > 1.  I
> > > > went into UTILITY Voice here are my settings:
> > > > UT MAP N=10A#-2
> > > > C=/024
> > > > I then went to the KITI and pressed AUTO
> > TRAIN-hit
> > > > pad
> > > > #9 and the numbers blinking were 1-1-3!!!  I
> > tapped
> > > > the Visulite (plugged into KITI) and the
> > friggin'
> > > > thing sounds like a high pitched bell/ then it
> > > > sounded
> > > > like pad#9's original setting in my user
> > kit...which
> > > > was a 3rd tom!!  WHAT the hell am I doing
> > > > wrong...also...should I copy this UT MAP Copy
> > from=1
> > > > Acoustic kit??
> > > > How do I move the cymbal from user kit 80 to the
> > > > KITI...and WHY is it flashing a 1-1-3 instead of
> > the
> > > > 0-2-4 that I assigned pad 9?  Am I doing
> > something
> > > > wrong w/ programming the KITI?....Jade
> > > > --- "liberatusvirus <liberatusvirus@y...>"
> > > > <liberatusvirus@y...> wrote:
> > > > > For once, we're getting more snow than you,
> > but
> > > > you
> > > > > may have more Al-
> > > > > Quaeda cells. Comments follow:
> > > > > 
> > > > > > Now that UTILITY MODE...on the MAP...the
> > Page
> > > > > you're
> > > > > > referring to is it  under section 5-1.
> > > > > > UT MAP N=   OC-2
> > > > > > =K/000  NO ASSIGN? 
> > > > > 
> > > > > That's it.
> > > > > 
> > > > > > So while I am on this MAP Page, I would set
> > the
> > > > > note
> > > > > > number for the ride bow (on my user kit I
> > > > created,
> > > > > I
> > > > > > have note #49 Category 040)  RIGHT NOW I
> > HAVE
> > > > > NOTHING
> > > > > > PLUGGED INTO OUTLET 6 ON THE DTX, so I would
> > > > have
> > > > > to
> > > > > > assign this cymbal sound to pad#9.  I could
> > COPY
> > > > > that
> > > > > > setting to say INPUT 7, then when and save
> > it to
> > > > > user
> > > > > > kit #80?  Am I following you right?
> > > > > > You say I would have to assign a different
> > note
> > > > #
> > > > > > other than the #49 on this UT MAP N= **would
> > the
> > > > > N= be
> > > > > > an INPUT or a NOTE NUMBER?  This is where I
> > GET
> > > > > > CONFUSED....and Where it says K+NO
> > > > ASSIGN...Would
> > > > > I
> > > > > > assign whatever the 040 Ride cymbal is or
> > would
> > > > > that
> > > > > > be the input number?  Please be patient with
> > me,
> > > > I
> > > > > > KNOW I am DENSE, just wish it would come
> > faster
> > > > > for
> > > > > > me...will wait for your response...
> > > > > 
> > > > > The "N=" setting is for midi note number. Stay
> > on
> > > > > that line for a 
> > > > > moment. As you scroll up from 0, you'll notice
> > > > that
> > > > > the module 
> > > > > notifies you when midi numbers are unavailable
> > > > > because they already 
> > > > > have a preset use. I forget the exact
> > terminology
> > > > > (I'm flying blind 
> > > > > here; I don't have the module). When you get
> > to
> > > > the
> > > > > first midi 
> > > > > number that comes up as available, stay with
> > it
> > > > (and
> > > > > remember it). 
> > > > > It might be around 15; that will be the note
> > > > number
> > > > > for the cymbal 
> > > > > voice that we're about to assign. Go to the
> > next
> > > > > line, "=K/000  NO 
> > > > > ASSIGN," which means "nothing assigned from
> > the
> > > > kick
> > > > > drum list"; 
> > > > > change the K to C, for cymbal; and write in
> > the
> > 
> === message truncated ===
> 
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Shopping - Send Flowers for Valentine's Day
> http://shopping.yahoo.com