Yamaha DTXpress/DTXplorer/DTXtreme

I checked every note for the entire kit, and 113 is
NOT assigned to anything..the other pad connected to
the 9/10 is the cymbal bell pad-that's on 10, and my
other tom was on 9-that's the one reassigned to the
cymbal that should read note 106-not 113.  But it's
funny, my tom is now on the cymbal.  I wonder if there
is a problem with the KITI?
Jade
--- "liberatusvirus <liberatusvirus@...>"
<liberatusvirus@...> wrote:
> Are you by any chance hitting the pad on input 10
> instead of input 
> 9? Or is there conceivably enough crosstalk when you
> hit 9 that 
> another pad's note number is going through? Check to
> see whether one 
> of kit 80's other inputs (a tom?) carries note
> number 113. If so, 
> see if you can figure out how it's taking over.
> 
> --- In DTXpress@yahoogroups.com, jadeiebooshkie
> <jadiebooshkie@y...> 
> wrote:
> > 
> > 
> > Here's what I did...I re read your last post...I
> went
> > into the UTILITY Menu and FOUND one mistake I
> made:
> > I now have these:
> > UT MAP N=106A#6 (this was listed as no assign)
> > =C/024 Ride Em  (This is for pad 9)
> > 
> > Under VOICE MENU
> > KIT*In=pad9
> > Copy To In=pad9
> > USER KIT 80 pad 9 showed the note 106A#6 with
> C/024
> > Ride Em
> > I unplugged the KITI and replugged it in Visulite
> is
> > in input 1 on KITI, input 1 is lit the red lights
> on
> > the KITI registered 0-0-1.  I tapped the Visulite
> then
> > pressed Auto Train on the KITI the 0-0-1 still
> > flashed, then I hit pad 9 (that's plugged into DTX
> > channel 9/10)...all the red lights lit up to MIDI
> NOTE
> > then the 1-1-3 started to flash, as it did before,
> not
> > 106 as it should be.  When I listen to the
> visulite in
> > my headphones, the sound it is picking up is a tom
> > sound...SOMETHING is not right, and I don't know
> if
> > I'M doing something wrong, or if there's something
> not
> > set with the DTX or if it's the KITI...I hit pad 9
> and
> > get a cymbal from kit 80, I hit the visulite, and
> I
> > get a tom...can you think of anything that may be
> the
> > problem...could the 9/10 split input on the DTX be
> > confusing the KITI?
> > Thanks for your help and patience with me,
> > Jade
> > --- "liberatusvirus <liberatusvirus@y...>"
> > <liberatusvirus@y...> wrote:
> > > We're getting there. 
> > > 
> > > > PS...one more thing....I unplugged the ride
> from
> > > the
> > > > KITI and plugged it into input 2 on KITI...I
> am
> > > still
> > > > getting the tom sound...that WASN'T a high
> pitched
> > > > noise I heard...it was a tom voice.  So my pad
> 9
> > > that
> > > > was my 3rd tom is now on my RIDE...I can't
> change
> > > the
> > > > note number on the KITI...it keeps flashing
> 1-1-3
> > > > instead of 0-2-4 or 0-2-6....It's gotta be
> > > something I
> > > > am doing wrong with the DTX.
> > > 
> > > It doesn't matter which input on the kiti you're
> > > using; the midi 
> > > note number gets transferred to the kiti's
> active
> > > input, which you 
> > > select either by hitting the pad connected to it
> or
> > > scrolling 
> > > through the inputs (the green lights) manually
> on
> > > the kiti keyboard.
> > >  
> > > > UT MAP N=65F...C/026 Rider3
> > > 
> > > This is the only setting that matters for
> getting
> > > the midi note 
> > > information from the DTX to the kiti. Midi note
> > > number 65 also has 
> > > to show up as the note number for pad 9 when you
> > > check in the voice 
> > > menu of kit 80. If so, save kit 80 with the
> button
> > > on the front of 
> > > the module. If not, don't do anything else until
> you
> > > make these 
> > > numbers match; if 65 turns out not to work, try
> > > other numbers. Save 
> > > kit 80 when you've arrived at a viable note
> number
> > > for C/026 on 
> > > input 9, just to make sure that you don't change
> > > anything by 
> > > mistake. (Acoustic kit 1 is irrelevant to what
> we're
> > > doing. If you 
> > > set up the note number for the ride on the kiti
> > > correctly, you'll 
> > > get the same ride sound for the visulite, no
> matter
> > > what kit on the 
> > > DTX you happen to be using).
> > >  
> > > To keep it simple on the kiti, disconnect
> everything
> > > but the 
> > > visulite bow. Hit the visulite to select its
> input.
> > > Now, 
> > > press "AUTO" to make "midi note number" the
> active
> > > parameter; three 
> > > red lights corresponding to a midi note number
> > > (probably not yours) 
> > > should be blinking consecutively, with a pause
> > > between each complete 
> > > cycle. Making sure that your foot is not on
> either
> > > the hi hat 
> > > controller or the kick pedal, hit pad 9, C/026,
> in
> > > kit 80; don't 
> > > accidentally hit any other pad afterward. After
> > > recognizing the 
> > > default channel 10, the kiti red lights should
> start
> > > to register 0-6-
> > > 5, or whatever your final midi note number
> turned
> > > out to be in the 
> > > DTX utility menu. If the correct number flashes,
> you
> > > can continue 
> > > to "Gain Auto Train" on p. 34 to adjust the
> > > triggers. If it doesn't, 
> > > it's back to the DTX to figure out why. 
> > > 
> > > 
> > > > 
> > > > 
> > > > --- jadeiebooshkie <jadiebooshkie@y...> wrote:
> > > > > 
> > > > > 
> > > > > Here's what I have done... I changed my user
> kit
> > > > > number to 80-went into voice and copied the
> ride
> > > > > setting to pad 9...when I hit pad 9 it
> sounds
> > > like a
> > > > > ride...the Visulite is plugged into KITI
> input
> > > 1.  I
> > > > > went into UTILITY Voice here are my
> settings:
> > > > > UT MAP N=10A#-2
> > > > > C=/024
> > > > > I then went to the KITI and pressed AUTO
> > > TRAIN-hit
> > > > > pad
> > > > > #9 and the numbers blinking were 1-1-3!!!  I
> > > tapped
> > > > > the Visulite (plugged into KITI) and the
> > > friggin'
> > > > > thing sounds like a high pitched bell/ then
> it
> > > > > sounded
> > > > > like pad#9's original setting in my user
> > > kit...which
> > > > > was a 3rd tom!!  WHAT the hell am I doing
> > > > > wrong...also...should I copy this UT MAP
> Copy
> > > from=1
> > > > > Acoustic kit??
> > > > > How do I move the cymbal from user kit 80 to
> the
> > > > > KITI...and WHY is it flashing a 1-1-3
> instead of
> 
=== message truncated ===


__________________________________________________
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com