I set the pad voice 1 to say C\018 (ridedrk1-volume 90) and voice 2 to say C\043 (Cup A-volume 30). I then set up the voice for the rim as say C\002 (crashac) and then set the "rim to pad" to "on". So, when I hit the pad I get C\018+C\043 and when I hit the rim I get C\018+C\043+C\002. (I am just guessing at the voices numbers.) OldGuyDrummer > -----Original Message----- > From: underneathheaven [SMTP:realvast@...] > Sent: Friday, May 30, 2003 2:50 PM > To: DTXpress@yahoogroups.com > Subject: [DTXpress] Re: Oh, my God, how many problems!!! > > oldguy: But Stewart, do you also set the rim to > > pad setting to "on". This way it sounds like you are still playing > ride > > pattern in the background even when you hit the edge/crash. I have > set one > > of my rides/crash this way, the others are separate with rim to > pad set > > "off". > > Oldguy, are you talking about getting a "ping" sound from the ride > during the crash sound? I have been interested in trying to get > that kind of sound but I thought I would have to layer my ride > cymbal with more volume on the ride than on the voice number 2 crash > behind it. Its not possible to layer two voices on rims correct? > If that was so, then I would like to keep a ride voice on the pad, > but have both a crash and ping sound on the edge, although I doubt > this can be done to the edge. > > -UN.H > > > > --- In DTXpress@yahoogroups.com, rdamon@m... wrote: > > You see this is exacting why you should have a ten year old around > when you > > put your toys together...they will read the instruction > manual.....as for > > me.... manuals????...I don't need no stinking manuals..... > > > > Seriously, I started out with two complete sets and never really > set up the > > basic set as shown in the diagram. I used PCYS for the hihat and > changed > > most of the pad types from the beginning to work with the two > modules. I > > just looked at the photo on the front cover of the DTXPRESSII > manual and you > > are absolutely correct, the pcy65s is on the left and the pcy65 is > on the > > right and the manual shows them connected to crash/ride > respectively. I > > humblely apology, 50 lashing for me. I never noticed that. I had > always had > > a 22" acoustic ride and I guess that I was so used to having a > > bell/bow/edge, that it just seem more logical to use the PCY65S as > a ride. > > You learn something new everyday. > > > > Like Stewart, indicated it really does work great by setting the > pad to a > > ride voice and the edge as crash. But Stewart, do you also set the > rim to > > pad setting to "on". This way it sounds like you are still playing > ride > > pattern in the background even when you hit the edge/crash. I have > set one > > of my rides/crash this way, the others are separate with rim to > pad set > > "off". > > > > OldGuyDrummer > > > > > -----Original Message----- > > > From: moosetication [SMTP:moosetication@y...] > > > Sent: Friday, May 30, 2003 12:55 PM > > > To: DTXpress@yahoogroups.com > > > Subject: [DTXpress] Re: Oh, my God, how many problems!!! > > > > > > --- "Vernon Graner" wrote: > > > > > > > Hey, OGD, I was wondering about this... maybe I set mine > > > > up wrong, but I have the "ride" as the PCY65 single zone > > > > pad on the far right of my kit and the crash/choke/dual > > > > zone OCY65S on the left. I coulda sworn that was how it > > > > was in the manual... or maybe I just set mine up wrong... > > > > > > You're right, that is how it is in the manual. But I have mine > set up > > > as OGD descibribes, with the 65S as a crash/ride on the right, > and 65 > > > as a crash on the left. It just seems to make more sense that > way > > > around, with two edge crashes and a ride on the bow. > > > > > > I have also moved the hi-hat... I actually shifted the module > over to > > > the right side of the kit (it hangs off the right hand upright > above > > > the "floor" tom arm), and moved the hi-hat to the arm previously > used > > > for the module. Apart from anything else, I just found it easier > to > > > position to my satisfaction that way around. > > > > > > Stewart > > > > > > > > > > > > > > > Yahoo! Groups Sponsor > > > > > > > > > > < <http://rd.yahoo.com/M=247865.3355058.4641699.1261774/D=egroupweb/S=1> > 70503 > > > 1972:HM/A=1482387/R=0/SIG=16ngka0jq/* <http://ads.x10.com/?> > bHlhaG9vaG0xLmRhd > > > =1054313731% > 3eM=247865.3355058.4641699.1261774/D=egroupweb/S=1705031972:HM > > > /A=1482387/R=1=1054313731% > 3eM=247865.3355058.4641699.1261774/D=egroupweb/S > > > =1705031972:HM/A=1482387/R=2> > > > > > > < <http://us.adserver.yahoo.com/l?> > M=247865.3355058.4641699.1261774/D=egroupm > > > ail/S=:HM/A=1482387/rand=487436129> > > > > > > Community email addresses: > > > Post message: DTXpress@onelist.com > > > Subscribe: DTXpress-subscribe@onelist.com > > > Unsubscribe: DTXpress-unsubscribe@onelist.com > > > List owner: DTXpress-owner@onelist.com > > > > > > Shortcut URL to this page: > > > < <http://www.onelist.com/community/DTXpress>> > > > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service > > > < <http://docs.yahoo.com/info/terms/>>. > > > > > ********************************************************************* > ***** > > The information transmitted herewith is sensitive information > intended only > > for use to the individual or entity to which it is addressed. If > the reader > > of this message is not the intended recipient, you are hereby > notified that > > any review, retransmission, dissemination, distribution, copying > or other > > use of, or taking of any action in reliance upon, this information > is > > strictly prohibited. If you have received this communication in > error, > > please contact the sender and delete the material from your > computer. > > > > Yahoo! Groups Sponsor > > > <http://rd.yahoo.com/M=247865.3355058.4641699.1261774/D=egroupweb/S=170503 > 1972:HM/A=1482387/R=0/SIG=16ng16ucf/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd > =1054320591%3eM=247865.3355058.4641699.1261774/D=egroupweb/S=1705031972:HM > /A=1482387/R=1=1054320591%3eM=247865.3355058.4641699.1261774/D=egroupweb/S > =1705031972:HM/A=1482387/R=2> > > <http://us.adserver.yahoo.com/l?M=247865.3355058.4641699.1261774/D=egroupm > ail/S=:HM/A=1482387/rand=412667873> > > Community email addresses: > Post message: DTXpress@onelist.com > Subscribe: DTXpress-subscribe@onelist.com > Unsubscribe: DTXpress-unsubscribe@onelist.com > List owner: DTXpress-owner@onelist.com > > Shortcut URL to this page: > <http://www.onelist.com/community/DTXpress> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service > <http://docs.yahoo.com/info/terms/>. ************************************************************************** The information transmitted herewith is sensitive information intended only for use to the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer.
Message
RE: [DTXpress] Re: Oh, my God, how many problems!!!
2003-05-30 by rdamon@mckinney-usa.com