Yamaha DTXpress/DTXplorer/DTXtreme

--- In DTXpress@yahoogroups.com, "liberatusvirus" 
<liberatusvirus@y...> wrote:
> --- In DTXpress@yahoogroups.com, "gordonbakos420" <g.bakos@i...> 
> wrote:
> > I think we're on the same page... since I could use a stereo 
cable 
> > in the 9/10 on a two zone, while the pcy65 jack is bouncing back 
> and 
> > forth between the two rings on the stereo plug, the module 
> sometimes 
> > sees it as a 9 and sometimes a 10.  BTW, I had lousy luck 
actually 
> > using a two zone with the 9/10 input. I finally wound up 
plugging 
> my 
> > extra pcy65s into the ride and my pcy65 into the 9/10 (I use 
that 
> > for the ride).
> 
> I just want to make sure that we are on the same page, because 
luck 
> should have nothing to do with how 9/10 behaves with a dual-zone 
pad 
> inserted. From what you wrote earlier, I'm assuming that you are 
> informed about the difference between stereo and dual zone and 
that 
> you weren't just saying that the PCY65s didn't work properly in 
9/10, 
> which would be true in principle. That being the case, which dual-
> zone pad didn't work well and why? Also, unless someone can 
confirm 
> your experience with 9/10 and a stereo cable connected to a mono 
pad, 
> I'm not convinced that your cable isn't faulty.
> 
> Ed



Whilst we are on this sort of subject,I have a question,I have a 
Yamaha PCY bell pad coming in the next day or so and I will be using 
it along side a TP 65 on 9/10.The question is do I need a stereo 
cable from the brain to the dual cable adaptor then 2 single mono 
leads to each of the pads.Or do I need a mono cable.


                   Russell Butterfield